Playing around in the garage after readind a linuxcnc article about using old gaming controllers as cheap Pendants
...
https://www.youtube.com/watch?v=WjyJ2rRBaQo
Managed to best my Monaco lap time with this ugly lap.
Thanks for Watching.
-- Camera --
FLIP Ultra HD 8GB
-- Gaming Rig --
Motherboard: GIGABYTE EX58 EXTREME
CPU: i920 3.6GHZ
Memory: 6 GB OCZ 2000MHZ
Graphics: 2 x XFX HD5970 Black Edition
Power: Corsair HX 850W ATX Modular
Monitors 1 x U2410 DELL, 2 x Samsung 2493HM
...
https://www.youtube.com/watch?v=OX2xZvugPh4
Worklog #14 Dax Rush 'daxro' worklog #14 Carbon Fibre sheet made on a Glass Table !
First of many carbon fibre sheets to be created on my newly constructed heated glass table. Designed to reduced the curing time for composite work.
Carbon Fibre Sheet.
Heated glass table.
...
https://www.youtube.com/watch?v=HHjlZlg3K8k
Drag Racing at North Weald with Maitland Racing.
A fun day out with lots of gear heads, general bants and chit chat.
Running in the high 12s low 13 seconds not to shabby for a stock hayabusa and a dodgy drag racer I kept hitting the rev limter, going to late blah blah but lots of smiles!!
Next drag race Test n Tune, 7th June
Time to work on my next map, increase the rev range and limter and install a switchable map button ;)
Any maybe lose some weight on the car and myself ...
Test n Tune events
http://www.maitlandracing.com/
...
https://www.youtube.com/watch?v=08y8cVQBpbY
Hayabusa Breather Cover Part 2 facing operation so please with the product so far :)
Subscribe for updates http://bit.ly/1D6vwOc
Checkout http://www.davro.net/
...
https://www.youtube.com/watch?v=ve2aiwlHTH0
My new Dax Rush Hayabusa walk around outside of the halls at Stoneleigh by best mate Scott who came along for the ride to the National Kit Car Motor Show. www.nationalkitcarshow.co.uk
...
https://www.youtube.com/watch?v=tTkTSp-x_OI
Fusion360 and LinuxCNC test piece.
This is an experiment using fusion360 to model a hayabusa engine crankcase breather cover for future modifications, generated gcode with Fusion360 and used LinuxCNC for machine controller.
My first ever CAD/CAM project :)
Subscribe for updates http://bit.ly/1D6vwOc
Checkout http://www.davro.net/
...
https://www.youtube.com/watch?v=WgA8KgB4qQE