I have wanted to build a powder coating system for quite a while now. I have finally got around to giving it a go. I built the gun entirely out of scrap fittings and stuff due to be thrown out.
The power supplies are just cheap 12v to 15kv transformers out of China (They are about $12NZD delivered)
Hi All,
Again, apologies for the wait - I didn't get the free time I had hoped over summer.
This video is a quick run down on pumps you can use for your DIY Vapor Blaster. To cover everything would take much too long, so I figured I would put this video up and follow up by answering any question you are left with either by comment, or potentially a follow up video.
Cheers!
https://www.facebook.com/AELNewZealand
My e-book is now available for sale. It combines much of the info in these videos into an easy to read PDF, and includes diagrams and illustrations to improve reader understanding.
If you are interested in the book, please head on over to https://armoury-enterprises.myshopify.com/
josh@armouryenterprises.com
...
https://www.youtube.com/watch?v=RKgAmcZ1ChM
A few people have asked me, over the last week or so, what I have been up too. All sorts really, trying to fill in on reduced work hours (like everyone else) and also I have done a little bit on the compressor.
Block was painted, removable aluminium parts were vapor blasted. Some bits electroplated with zinc.
Still getting questions over my e-book and nozzle build guide. All can be found here:
https://payhip.com/ArmouryEnterprises
Thanks for watching!
...
https://www.youtube.com/watch?v=tviEiXvssUw
Yesterday I posted a video on the break down of my home made nozzles.
Today I deliver on my promise to show it working.
https://www.facebook.com/AELNewZealand
My e-book is now available for sale. It combines much of the info in these videos into an easy to read PDF, and includes diagrams and illustrations to improve reader understanding.
If you are interested in the book, please head on over to https://armoury-enterprises.myshopify.com/
...
https://www.youtube.com/watch?v=4d3zaD016-4
In this video, I cover off the method I used to improve the lighting on the SBC-100 vapor blaster conversion using aluminium extrusion door slides and 3d printed brackets.
Any questions, feel free to comment or send me an email at:
josh@armouryenterprises.com
Books and nozzles available here:
https://www.armouryenterprises.com/collections/all
...
https://www.youtube.com/watch?v=XrtWqFwFHTg
I put together a similar setup for testing my early DIY nozzles. Since then I adapted it to clean media out of stubborn areas in my cabinets, and to clean silt out of my filter boxes.
You can see the nozzle build in this video:
https://www.youtube.com/watch?v=jaU3Rfxdj0k&t=2s
And find the 3d printed nozzle .Stl files here:
https://www.armouryenterprises.com/products/3d-printable-vapor-blasting-gun-stl-files
Or any other queries - feel free to flick me an email:
josh@armouryenterprises.com
Thanks for watching!
...
https://www.youtube.com/watch?v=HuC8Rqfve6E
Just a quick follow up to yesterday's video. There has been a bit of interest in these nozzles. This is the test of the next one to be sent out to the US tomorrow morning.
I just wanted to add a couple of points. These were designed to keep prices down and make vapor blasting as accessible as possible to everyone. That said, I am more than happy to build and ship them anywhere in the world. At this stage, my youtube stuff and vapor blaster builds are still a side hustle, but I will do my best to get items built and shipped out as quickly as possible while working around my regular job.
Info on the nozzles shown in the video:
Comes with an 8mm ceramic tip and available with 2.5mm, 3mm, and 3.5mm air jet to suit your air supply.
$43USD for the Nozzle,
And approximate shipping is as follows:
* Parcel post (3-10 days estimated shipping time - Untracked): $14.50USD
* Courier (2-6 days estimated shipping time - Tracked): $34.55USD
*** Prices are indicative and subject to exchange rates***
You can find my Vapor blasting e-book and nozzle build guide here:
https://armoury-enterprises.myshopify.com/
If you are interested in purchasing a vapor blasting nozzle as shown in the video, they are also available at the above shopify link.
or check out the website at:
www.armouryenterprises.com
Thanks!
...
https://www.youtube.com/watch?v=P6wPvLG7pOE
Available now,
If you are interested in the book, please head on over to https://armoury-enterprises.myshopify.com/
Also 8mm and 10mm nozzles for diy vapor blaster guns.
Also on FB and email
https://www.facebook.com/AELNewZealand/shop/?rt=19
And lastly, a quick explanation of the pressure metering valve I covered in my previous video to answer a views question.
...
https://www.youtube.com/watch?v=-_i7oszXO6s