Harbor Freight Professional DeepWell 12-Point 1/2" Drive Impact Sockets Review
Here is a review of the more recently released set of Harbor Freight Pittsburgh impact sockets the 12 point deep well 1/2 inch Drive which are hard to find normally, #61903, #61902 . .
Here we are comparing various quarter inch Drive hex ratchets and showing why they're so useful . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=qBh_SnWxuXI
This is the best air hammer harbor freight has ever had... to bad it is not good as I had hoped for the expensive price. It is reasonably quiet and low vibration and has a heavy hammer but has a slow reciprocating rate so does not deliver as hard as I was wishing especially when comparing to a old Marflow rivet buster.
Harbor Freight #CH401LB, 56524
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=0ft0dRBWpAk
Are we are reviewing the Harbor Freight flexible magnetic pickup tool with LED light . 94614 . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=uFaWthf621U
HW ENP-1 & ENP-2 heavy duty industrial Bounce House Fan review and talking about their various usage and why these are so much better than the other bounce house fans that are out there. . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=G1QNnjZjOok
Here's a review of Harbor Freights 6649 wire and cable Cutters. These things are really cheap and actually surprisingly well made they just are not for hardened steel wiring cable only mild steel and would be great for heavy electrical wire. . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=KoAaolmYksk
Just a review of this neat little 30 amp fuse Blade Tester and monitor very handy for fuses that repeatedly blow or to make sure you're not overloading. . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=8nNUtkkhpSE
This is just a short video talking about the surprisingly well built "budget" Snap-On ratcheting sheet metal wrenches. I also compare an old version to a newer version.
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=0K8E0Akc9Us
This is Makita's nice little 3/8" 2100 Rpm 3.3Amp drill. I do a small drilling test and a small teardown as well. this unit was one of the last of the Buford, Georgia built units and is all ball bearing and shows how small drills are just fine even if they do not have a giant motor, and they are lighter and more compact to use when you don't need tons of power.
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=L4r4ahbSvYk
O'Reilly's GM4315, I believe originally sold as the Topeak TT2524 Rocket Lite DX Tool. This is one super microscopic ratchet I compact pearhead with a little reversing switch it is really neat and seems to be reasonably strong for its size and could be real Lifesaver in many Automotive situations also good for bicycles because it is lightweight and compact. . .
www.teespring.com/stores/catusmaximus
...
https://www.youtube.com/watch?v=kwWTaUpZbhg