Still learning on the G10 Pitbull. Too heavy with 5040's... lost an 808 cam from crash early on, so not much on-board vid ;( Lots of flyby though. ... https://www.youtube.com/watch?v=M7Bf6KClVto
tinyhawk s w/ old original tinyhawk motors on 2S.
this could be the ticket;
*new "s" replacement frame
*old motors w/ old quad-blade props (probably on clearance soon)
*new replacement fc w/ removed VTX
+your own cam & vtx
...
https://www.youtube.com/watch?v=pK8J103jckI
This shows the difference between raw camera output and the heavily processed final image when dealing with 1.33X anamorphic lens at 4K, in low light. DaVinci so amaze!
Desqueezed like this; https://vimeo.com/226692566
Source: 3840x2160, 30fps, 100mbps AVC
Destination: 5108x2160, 24fps HEVC
The Pixel 2's AVC (H.254) has much less banding / artifacts than HEVC (H.265) on FiLMiC Pro's "Extreme" setting, especially in low light.
The Temporal NR is;
Frames: 5
Mo.Est.Type: Better
Motion Range: Medium
Temporal Threshold: (L100, C100, M100, B0.0)
Spacial NR Mode: Enhanced
Radius: Small
Spatial Threshold: (L0.0, C100, B100)
Motion Blur: Disabled (None)
Stuff used here;
Google Pixel 2 XL
ULANZI 1.33X Anamorphic Lens
FiLMiC Pro LOG V2
DJI Osmo Mobile 2
DaVinci Resolve 16 Studio
Clean export without raw overlays: https://youtu.be/QGGFaMOjED4 (private link)
...
https://www.youtube.com/watch?v=5WZk5hQKXtQ
1 of 4 packs before the rain came down and resulted in total "RXLOSS". Still gotta take it all back apart and coat it up, plus fix the camera now. Session edit to follow.
BTFL 4.1.2, 16.77 48kHz w/ (JazzMaverick) Telemetry & RPM Filtering enabled
O_H_5_48_REV16_77.HEX
FPVCycle "BabyTooth" Frame (2mm): https://fpvcycle.com/products/fpvcycle-babytooth-frame-choose-your-thickness?_pos=1&_sid=ba9775b37&_ss=r
BetaFPV 1S Brushless AIO FC V2.1: https://betafpv.com/products/f4-1s-brushless-flight-controller-v2-0-frsky-rx
FPVCycle "1202.5 11,500KV" Motor w/2mm Shaft: https://fpvcycle.com/collections/new-products/products/fpvcycle-1202-5-11-500kv-motor-2mm-prop-shaft
Gemfan Hurricane 3016 Durable Tri-Blade 3" Props: https://pyrodrone.com/products/gemfan-3016-3-props-2cw-2ccw?_pos=9&_sid=3c6718dc5&_ss=r
Caddx Beetle Mullet Mod 5.8Ghz 48CH 25mW Mini FPV AIO (w/IR filter removed): https://www.heli-nation.com/caddx-beetle-mullet-mod-5-8ghz-48ch-25mw-mini-fpv-aio-camera-heli-nation-exclusive
FlyWoo Micro Arm LED Board Light 1/2 Bits 4x10mm 1-4S (white): https://flywoo.net/products/4-pcs-flywoo-frame-arm-led-board-light-1-2-bits-4-10-15-20mm-1-4s-for-rc-drone-fpv-racing-multi-rotor?variant=29485227409460
...
https://www.youtube.com/watch?v=4BWkovv8New
Dawn Golden Hour, using a Silverwared Eachine H8 w/ Caddx Beetle.
Mostly just cruising through the steam and enjoying the lens flares.
::Gear List::
Stock Eachine H8 Blue Board (w/ prop guards and other superfluous plastic removed)
^^^ w/Silverware firmware (31.10.16 stock)
CL-0615-17 Coreless Motor ("INSANELY FAST")
^^ This doesn't make much if any difference imho; stock motors feel just as good. Once again, the only thing that made the H8 fly any better is the Silverware firmware, period! They're on clearance, so I tried 'em; https://www.airbladeuav.com/collectio... (coupon code: "CLEARANCE" = $5 for a set of 4x)
Caddx Beetle CMOS 800TVL FOV 170 4:3 NTSC Camera With VTX
Turnigy nano-tech 260mAh 1S 35-70C Lipo Pack (~5 minutes each @ 4.2V)
FrSky Taranis X-Lite
IRangeX IRX4 LITE (Mixer = AETR!, Multi: Bayang / Bayang)
Recorded via ground-based DVR;
Fat Shark Dominator HDO
ImmersionRC rapidFIRE VRX Module
FXT 60FPS Analogue DVR w/ WiFi, Android & iOS Support (all I used was the record button on it)
Music: Quantic - Time is the Enemy (from "The 5th Exotic")
...
https://www.youtube.com/watch?v=ltYq4N9zVmQ
Cicada BLHELI-S 7A 1-2S
Turnigy Multistar BLheli_32 ARM 32bit 7A 0.8g Race Spec ESC 1~2S (OPTO)
2.5V is the lowest anything will spin at full throttle, and neither really did significantly better. I seriously doubt you'd be able to get much thrust at 2.5V, and if the controller decides to momentarily brake a motor, it might not spin back up if it's totally stopped. This does hint at a 1S 18650, 1103-based sub-120g ("toothpick" class hex) LR Arducopter at least being possible, as long as the props are already spinning and you're on your final landing descent at around 2.7V. This will be dependent on AUW and how well an autopilot can slowly scale up the average throttle / tune to maintain altitude as the battery nears full discharge.
Both were stock firmware / settings. I may attempt to tweak such things once they're on a frame.
http://www.sunrisemodel.com/en/product-details.php?cid=100&id=98
https://hobbyking.com/en_us/turnigy-multistar-blheli-arm-32bit-7a-0-8g-race-spec-esc-1-2s-opto.html
...
https://www.youtube.com/watch?v=56TsOpCe_YQ
Uncut, so skip around ifyawant. I have no idea what we were trying to do. My friend's cousin stole some DV cameras from his job at sears, and I got one. My other friend's mom bought a stang for some reason, so we swiped it and found an industrial park to shoot a car chase. You could get away with more in the 90's and early noughtz yo. fukknowz?!?
DJ Dorklubez and some other guy. I'm not tagging this... be grateful you found a slice of the 90's.
...
https://www.youtube.com/watch?v=h5B7xz6Od7A
Original Upload: May 2, 2011
This is an ancient edit from La Vernia Airsoft in Texas. This is one of the first times I was there with my original indoor CQC night gear, long before I adapted my loadout to outdoor field play. It was by far my favorite Airsoft field when I lived in Austin, and was well worth the drive; https://www.facebook.com/AirsoftFieldLaVernia/
...
https://www.youtube.com/watch?v=0YO6o3ymG7Y