It can be difficult to insert the filament into the Feeding Units because they are generally below the print bed.
This bracket raises the Filament Feeding Units higher for easier access...
I change back to the Original Creality Feeder because the filament has to bend too much using the dual gear feeder.. This cause stress on the filament and can lead to more breakage of the filament. This involved using M92 E96, M500 to reset extruder E Steps.
For a bit better cable management the cables for the Feeder Units may have to exit the left side of the control box, this would need an extra hole drilling in the control box
BTT Smart Filament Sensor Fix
I treat this as a bit of a workaround but the works as expected now...
M412 D10; Smart Filament Encoder requires this
Ref: lstepnio commented
Setting M412 D10 got me up and running. As lstepnio says would
false trigger pretty consistently but so far working without issue
with M412 D10 in Start G Code ( D10 = 10mm)
https://github.com/bigtreetech/smart-filament-detection-
module/issues/9
https://marlinfw.org/docs/gcode/M412.html
...
https://www.youtube.com/watch?v=rsrocD72V_A
Milky Way
This Picture of the Week shows a beautiful meeting between the Swedish–ESO Submillimetre Telescope (SEST) and the Milky Way, apparently almost touching each other. This shot was taken at ESO’s La Silla Observatory, located on the outskirts of the Chilean Atacama Desert, at an altitude of 2400 metres.
Light and darkness shape the Milky Way as it stretches across the night sky. The dark patches are dust clouds blocking the light behind them, coming from millions of stars in the central region of our galaxy.
SEST was built on behalf of the Swedish Natural Science Research Council (NFR) and ESO in 1987. It is a 15-m radio telescope, and it was the only large sub-millimetre telescope in the southern hemisphere at the time of first light. In 2003, the telescope was decommissioned as it was superseded by the Atacama Pathfinder EXperiment telescope (APEX) and the Atacama Large Millimeter/submillimeter Array (ALMA) further north in Chile. Over the years SEST has observed a wide range of astronomical objects, from comets to stellar nurseries and galaxies.
About the Object
Name: Swedish–ESO Submillimetre Telescope
Type: Unspecified : Technology : Observatory : Telescope
Category: La Silla
Credit:
ESO/A. Ghizzi Panizza (www.albertoghizzipanizza.com)
https://www.eso.org/public/images/potw2312a/
...
https://www.youtube.com/watch?v=WnQpea3QHnU
Heat Paste Dispenser 3D Print Part 3
HY510 Thermal Grease
Heat Grease/Paste is a better name for this one. Dispenser for syringe of flux or solder paste by mordaha on
Thingiverse:
https://www.thingiverse.com/thing:4549023
...
https://www.youtube.com/watch?v=wp_N73xCHDU