Older Tormach CNC Machine owners who are capable are now able to do this the firmware update ourselves since Tormach Uploaded Repair Information, Schematic and Firmware to their GitHub.

My Board Firmware was 32574_R07.

I am using a Xeltek 6100N to Program the Tormach CNC Control Board's PIC16F1947 with the current Tormach Firmware (32574_R08). #righttorepair

Tormach Firmware Files.
https://github.com/tormach/Repair-Information/tree/main/Firmware.

Tormach's Firmware Uploads are Missing the Config Bit Settings, I did a Read On My Original First and Noted the Configuration Bits and Saved Screen Shots.

The Configuration Bit Settings Can Be Found Here: https://www.stevenrhine.com/?p=77400

Sorry, For The Buzzing the Heat Pump on my Water Hater Heater Kicked On This Microphone Picks it up Really Really well.

Programmer:
Xeltek 6100N: https://www.xeltek.com/universal-programmers/xeltekusauniversalicprogrammersuperpro6100

Xeltek Superpro Facebook User Group
https://www.facebook.com/groups/177492164478365

No, you do not need a $1,000 Xeltek programmer you can use a $35.00 Microchip Pickit3 with MPlab X (Mplab IPE) https://www.amazon.com/pickit-3/s?k=pickit+3 or other pic programmer.

If you would like your firmware updated and do not feel comfortable I can do it for you for a small fee + shipping. You can get my contact info form my blog www.stevenrhine.com

#tormach #xeltek #microchip
...
https://www.youtube.com/watch?v=FuDzZoWBTR8