http://MyMustangRestoration.com - Now we have the outer wheelhouse welded on, now we can prime the bare metal. After scuffing everything, we used self etch primer to provide adhesion and provide corrosion protection. After allowing to flash, we sprayed the areas with high build primer.
Once the metal, welds locations and seams were primed, we applied seam sealer over all welds and seams to seal out moisture. This will prevent rust from creeping in later.
Once we had everything sealed up, we used bed liner coating to undercoat the inner parts that will be covered when the quarter panel installed.
Next, we'll finally install the quarter panel....it's been a long time coming!
Please don't forget to subscribe to our YouTube channel at http://YouTube.com/ButlerCollision
Also subscribe to http://CollisionBlast.com and share this video with others.
He is flying...not Titanic or Peter Pan, but BMX style. There is a BMX trail by my house that my boys ride at. I guess you could say the jump in this video was not a success!
FREE access to training at http://CollisionBlast.com
Quick video update of the progress on our Mustang project.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Music
http://rumblefish.com
Hey YouTubers, welcome to my YouTube channel, DIY Auto Body and Paint. If you're watching this video, then you have not subscribed to my channel. If you're wanting to learn how to repair and paint your car, then click the subscribe button, because that is what this channel is all about.
You'll learn about replacing parts, metal straightening, body fillers, plastic repair, welding, sanding, prepping, priming, painting, clear coat, tricot, detailing, and more. Lot of great stuff heading your way so be sure to subscribe.
FREE access to training at http://CollisionBlast.com Share this video
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
http://CollisionBlast.com - This is a student led demonstration in the Collision Repair program, of how to hold a body hammer and how to dress a body hammer.
FREE access to training at http://CollisionBlast.com - Learn About The Top How-to YouTube Channel's. These channel's were selected by YouTube as the YouTube Next Up How To Guru's. We've been working together to learn how to improve our videos to provide you with better how to tutorials. Be sure to subscribe to the other Top How To Channels below.
http://www.youtube.com/OnlineSoccerAc...
http://www.youtube.com/ButlerCollision
http://www.youtube.com/meliney
http://www.youtube.com/NaturesKnockout
http://www.youtube.com/BeforeAndAfterTV
http://www.youtube.com/MyCupcakeAddic...
http://www.youtube.com/cartoonblock
http://www.youtube.com/KennyChumsky
Royalty Free Music by http://audiomicro.com/royalty-free-music
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Creative Commons Music Used
Chris Zabriskie -- Out of the skies under the earth http://freemusicarchive.org/music/Chr...
Josh woodward -- Already there www.joshwoodward.com
Kevin Macleod - Danse of Questionable Tuning www.incompetech.com
Kevin Macleod - Porch Swing Days - Faster www.incompetech.com
Josh woodward -- Go www.joshwoodward.com
Josh woodward -- Symmetry and the pocket of angels www.joshwoodward.com
JOsh woodward -- Memorized www.joshwoodward.com
Josh woodward -- Revolution now www.joshwoodward.com
JOsh woodward -- talk about your feelings www.joshwoodward.com
There have been a lot of confusion between quarter panels, unisides, and fenders. This is a quick video response to help answer this question and explain what the differences are. FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/Hr4eOK1kQHs
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.