Published By
Created On
3 Jan 2023 05:52:14 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
Vodcast Ep 4 - "To teach or not to teach"
Website: https://www.flacowatts.com
Hello to all of you patient fans... I'm sorry to keep you waiting. I'm sure the three of you that were impatiently waiting on pins and needles for the release of this next video, are finally breathing a sigh of relief.
My excuses for procrastination are many. It's been over two months I believe since the last video. I went elk hunting 3 times and antelope hunting twice. I've gone through an entire harvest cycle and am back to the point where I'm just about done trimming and a few weeks out from next harvest. Busy-busy.
If I took an honest look, the real reason for the delay is that the funding opportunity I set my hopes in fell through. I think I went through a couple week period of apathy for the whole thing.
But I'm back and I'm over that nonsense. I'm dedicated to getting my "how to grow at home" courses out to the world. I think the world needs some reasonable guidance in this area and for my own sanity I need to get it out there.
So, it's gonna happen now one way or another and I need your help. The more help I get... the better it'll be. When I was filming this video I was contemplating several options from not doing it at all to crowdfunding. That was two months ago and I believe I've settled in on a plan. I'm gonna build a set and write the script over the next 3 weeks. Then a couple of guys are coming for a week or two of hard filming. Then a couple weeks of editing and maybe another round of filming and editing.
I've resigned to doing this project by myself (no investors, no producers) although it's not something I can do by myself. Well...with the help of a few hundred viewers giving a few bucks, I would be able to hire the guys and gals I need to get it done right. Duh! Why didn't I think of this before?!?! Crowdfunding... the power of a little by many. Let's do it!
I'll make a follow-up video soon that is a stand alone pitch for crowdfunding. I'm setting up the crowdfunding campaign as we speak . This is a link to the gofundme account I have set up. gf.me/u/v7ka7b Any all donation will help to building these courses and teaching the world how to grow cannabis at the highest level.
Thank you for your patience and support and remember I have no doubt that I can teach each and every one of you to grow at the highest level. So get ready and #sfa.
Flaco
...
https://www.youtube.com/watch?v=2ngDoEiZmxQ
Hello to all of you patient fans... I'm sorry to keep you waiting. I'm sure the three of you that were impatiently waiting on pins and needles for the release of this next video, are finally breathing a sigh of relief.
My excuses for procrastination are many. It's been over two months I believe since the last video. I went elk hunting 3 times and antelope hunting twice. I've gone through an entire harvest cycle and am back to the point where I'm just about done trimming and a few weeks out from next harvest. Busy-busy.
If I took an honest look, the real reason for the delay is that the funding opportunity I set my hopes in fell through. I think I went through a couple week period of apathy for the whole thing.
But I'm back and I'm over that nonsense. I'm dedicated to getting my "how to grow at home" courses out to the world. I think the world needs some reasonable guidance in this area and for my own sanity I need to get it out there.
So, it's gonna happen now one way or another and I need your help. The more help I get... the better it'll be. When I was filming this video I was contemplating several options from not doing it at all to crowdfunding. That was two months ago and I believe I've settled in on a plan. I'm gonna build a set and write the script over the next 3 weeks. Then a couple of guys are coming for a week or two of hard filming. Then a couple weeks of editing and maybe another round of filming and editing.
I've resigned to doing this project by myself (no investors, no producers) although it's not something I can do by myself. Well...with the help of a few hundred viewers giving a few bucks, I would be able to hire the guys and gals I need to get it done right. Duh! Why didn't I think of this before?!?! Crowdfunding... the power of a little by many. Let's do it!
I'll make a follow-up video soon that is a stand alone pitch for crowdfunding. I'm setting up the crowdfunding campaign as we speak . This is a link to the gofundme account I have set up. gf.me/u/v7ka7b Any all donation will help to building these courses and teaching the world how to grow cannabis at the highest level.
Thank you for your patience and support and remember I have no doubt that I can teach each and every one of you to grow at the highest level. So get ready and #sfa.
Flaco
...
https://www.youtube.com/watch?v=2ngDoEiZmxQ
Author
Content Type
Unspecified
video/mp4
Language
English
More from the publisher
Controlling
VIDEO
WEEKE
weekend-update-2-leds-installed,-room
Website: https://www.flacowatts.com
Optic LED: http://opticledgrowlights.com?aff=348
Hello all of you wonderful people... on both sides of reality... how are you?
This video is both an update and a rant. An update on the course and the room remodels... a rant on the election and the impending destruction of free society or the coming progressive utopian love fest depending on which side of reality you're on.
Either way, things sure are getting exciting. The final episode of 2020 should be a doozey. Stay with me till 2021 no matter what though because the course won't be out till then and I need help paying for this great venture. Ironically, if I'm lucky enough to hit it big and finally maybe get a 7 figure return on this project I'll have to pay 62% tax, when, had I released it this past year, I could have walked off paying a mere and reasonable 15%. Kinda sucks the incentive right out of my fun bag. I guess I'll be doing it not for the financial freedom to do other and bigger things, but instead so I can fund all the "free" stuff coming.
? When do I start getting the free stuff? Do I need to quit my job first?
Alright enough shit talking... good luck America... may God have mercy on you... unless your in the wokeism religion in which case may father Marx limit your days of suffering until thou are saved by your lord and savior joey biden.
✌️Flaco
?? 2020
?? 2021
...
https://www.youtube.com/watch?v=3Eamz4BqUtM
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
FLOSH
floshow-ep1-new-year-new-mission
Happy New Year Folks!! I should have had this out last week but me and my girl came down with the Rona. I'll tell you all about it in the next weeks video.
This is the inaugural "FloShow" of 2022. You can expect a new one every week (to the best of my abilities) and I'm open to suggestions so put them in the comments or email me: flaco@flacowatts.com
Here are the Cannanews links:
Beard Bros:
https://beardbrospharms.com/2021/12/what-is-a-chad/
High Times:
https://hightimes.com/news/new-mexico-releases-final-adult-use-cannabis-rules/
Leafly:
https://www.leafly.com/news/lifestyle/top-stories-2021
...
https://www.youtube.com/watch?v=fqfOrIqJrvE
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
COURS
course-update,-room-tours,-led-feedback
Website: https://www.flacowatts.com
Optic LEDs: http://opticledgrowlights.com?aff=348
The filming has begun!! While the production company slaves away editing the ungodly amount of footage we got last week, I will be slaving away documenting an entire run harvest over the next two months. Hoping to get a new rig for those purposes. Thank you for the support and if you haven't already, buy the course now for $100 before it goes up next month to $200 and then ultimately to $270 for one and $420 for two when the course is released.
Let me know your thoughts and concerns in the comments please... and be good to your kids. If you don't have kids, be good to someone else's kids.
Flaco
Check out the site and shoot me some loot ✌️
Daddy needs a new camera ?
...
https://www.youtube.com/watch?v=pisJ1daWAp0
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
THC%
thc-cap-laws-!-!-a-new-level-of-stupid
Here's a little rant about the absurd level of ignorance with our law makers regarding their understanding the difference between solids and liquids. Humans are legally allowed to cozy up to the bar and down a shot of 190 proof Everclear, presumably to the point of death, but at the same time lawmakers wish to impose potency laws on flowers. ?♂️?♂️?♂️
Enjoy...
Oh, and let me know what you think about the sample video at the end. ✌️
Flaco
...
https://www.youtube.com/watch?v=u2EazT6KPqA
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
THE C
the-cannabis-community-and-the-reason-we
Website: https://www.flacowatts.com
Hello all,
A very important video here demonstrating the value in pursuing your journey to become a high level grower. With your knowledge and skill in place, you can make a huge difference in the lives of others.
Start by making a difference here:
https://www.gofundme.com/f/xavier-trujillo-fundraiser?utm_source=customer&utm_medium=copy_link&utm_campaign=p_cp+share-sheet
and for those that need to type it:
gofundme.com/xavier-trujillo-fundraiser
And here's the link to the article:
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5964193/
Thank you all for continuing to follow along. As mentioned in the video, we will begin filming the classes starting Monday December 16th. Follow along for updates and behind the scenes on Instagram. I don't anticipate getting it all done that week but who knows ?♂️Wish us luck!
The website is still not trustworthy. Sorry. Hopefully soon. Thank you for your patience. It'll be worth the wait.
Flaco
...
https://www.youtube.com/watch?v=2H18bWBbI7k
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
FLACO
flaco-watts...-soil-assassin
Website: https://www.flacowatts.com
Welcome to the world of Flaco Watts. It's a world where we take care of ourselves, our family and our friends. It's a world of home growers who give a shit about the quality of their plants and what goes into them. Let the industry boofs chase the money. They'll never reach our level, the level of the home grower who gives a shit.
-------------------------------------
If you're one of those people swimming in more money than you know what to do with, please consider supporting us on our mission to educate an entire generation of responsible and high-level home cannabis cultivators. I don't know those kind of people so I have to fund this on my own at the moment. But... we have a big vision and could certainly use help.
Alternatively, if you're more like me in your means... consider pledging 5 or 10 bucks a month to help us launch our courses via this link:
https://www.patreon.com/flacowatts
I just set that up and have no idea how to use it but I'll learn soon enough. Thank you and share
✌️
...
https://www.youtube.com/watch?v=RKGd13brKUU
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
BLUMA
blumat-moisture-meter-review-course
Ladies and Gentelmen,
It's finally here!! No, not the Blumat moisture meter but instead I've finally begun editing and finishing the first of the possibly 100+ videos for the how to grow cannabis at home-the fundamentals course. I've dropped the first sample video (still in draft form) at the ass end of this video. It'll give you a good idea of the studio setting.
I've also been forced to commit to pushing out a YouTube video weekly and this being Friday, I hope to put a new one out every Friday going forward until we release the course. The main purpose of those is to trick the YouTube algorithm into thinking I'm a consistent content creator so that it will stop screwing me over. "You can't have any pudding if you don't eat you meat!!!!!" - YouTube Algo.
Oh! buy the course now and save some loot! For the rest of February you can get one for $100 and two for $200. (Assuming I can figure out how to change the price) it will jump to $200 for one and $400 for 2. You will still get lifetime membership to the site if you buy now and up to the day the class is released. Those poor souls will only get one year's membership per class they buy, then after that they'll have to pay yearly dues.
If you're reading this, you are in on the ground floor of something big. I wouldn't have made it this far if it wasn't meant to be. Let's stop fucking around and get it done!! Here's how you do your part:
1) Check out the website
2) Buy the course (or both courses)
3) Fill out the (funny) survey
4) Like this video
5) Share this video (even if it's just to your own email it helps)
6) Download this video (delete it later)
7) Save this video (to any made up playlist)
8) Make sure you're subscribed... YT keeps fucking with the numbers
9) Share the video and the website link with 5 friends
Prove to me you did them all and I'll send you a handful of my new (badass) stickers. The same one you see on the podium in the sample video from the course.
Here's some links:
https://flacowatts.com/
https://www.kisorganics.com/
https://www.kisorganics.com/products/digital-moisture-meter?_pos=9&_sid=472cc10c1&_ss=r
https://www.soildoctorconsulting.com/
https://soildoctorconsulting.teachable.com/p/cannabis-soil-lab
https://open.spotify.com/show/1MM4vf9NGTO3ti58a4yLVb?si=JWZS-j6jThOQ6tPK2UjAxQ&nd=1
https://podcasts.apple.com/us/podcast/cannabis-cultivation-and-science-podcast/id1258365194
...
https://www.youtube.com/watch?v=0dmDet1vCgo
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
STIMM
stimmi-time!-also,-an-invitation-to-the
Hi Friends,
I of course am deliriously tired and have been up for 24 hrs (again). I'm gonna go take a nap and when I rise from the dead, I will write a witty and entertaining description. Till then, enjoy the video and sweet dreams.
Ok I'm back to reality. I wanted to let any of you reading this that I shall return next week with a very short video basically just reading your comments... I liked that. You see, I don't really have time to put into these weekly videos now that we're about done filming. Every spare second I need to be editing.
That being said, leave a comment if you want to talk on camera. Also, if you want to leave a comment that I don't read and react to then just put FYEO at the start of it. Thank you everyone and wish me luck over the next few weeks.
✌️Flaco
...
https://www.youtube.com/watch?v=yhqEc-NPcH4
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English
Controlling
VIDEO
VODCA
vodcast-ep-2-intro-to-the-new-genetics
Website: https://www.flacowatts.com
Ahhhhh! I messed up! I posted the video with a pretty solid mistake in it and so here I am reposting it. ?♂️I apologize to the 20 people that already watched it. Don't be afraid to rewatch and relike.
This is the second episode of my weekly Vodcast... if that wasn't already obvious. I'm hoping to sprinkle in a couple of educational videos in the coming weeks but a lot could change.
Stick around and I'll keep you up to date on the happenings.
Thank you for watching and supporting this little movement.
Questions and comments: flaco@flacowatts.com
I only check my email once or twice a week when I'm busy, and I'm freaking busy, so be patient.
...
https://www.youtube.com/watch?v=w-eBSGkMBvI
Transaction
Created
2 weeks ago
Content Type
Language
video/mp4
English