NOS Cobra 2204 2300kv motors didn't enjoy our abusive relationship. Got they magnets blew out. I was out in the GR stix where all they had was a Walmart to make repairs after the VHB & zipties didn't hold the chunk of steak knife I had bracing the broken port bow arm. I acquired & chopped up a fiberglass arrow, wrapped it with car seat upholstery stitching thread and gorilla glued it so nothing could unravel. Somehow I didn't notice that the bolts holding that motor on were vibrating their way loose despite the loctite, likely due to the temporary fix having a bit of flex to it compared to the rest of the carbon frame, or the freshly loosened magnets.
Detroit Multirotor Pitbull (old-ass heavy frame) Cobra 2204 2300KV Motors Rotorgeeks RG20 ESC's running BLHeli (OneShot125) Naze32 Rev6 FC running BetaFlight 3x DAL "Indestructible" 5040 & 45BN props ... https://www.youtube.com/watch?v=yCAfAEo-GqM
Originally Uploaded; April 5, 2011 at 4:25 AM
First ever Airsoft with an AEG in Presidio, TX. Me n' me julie. That's an Ali G reference, not a name.
...
https://www.youtube.com/watch?v=nO7jZbEwekY
"Never bomb Serbia" to catholic school w/NWA. No wonder insomnia eh? This is my second "ImmersionRC PowerPlay DVR" session edit.
About 0°C, 4-5am... Flying the same ol' 25-gram Eachine H8 w/ Silverware. It's been dunked in a lake, probably 200+ packs through it, crashed a hundredish times. On the 2nd AIO, 2nd power connector and 3rd set of motors, but it still flies just fine.
https://www.immersionrc.com/fpv-products/powerplay/
https://www.immersionrc.com/fpv-products/rapidfire/
https://www.fatshark.com/product/hdo-fpv-goggles/
https://caddxfpv.com/products/beetle-v1
Edited with DaVinci Resolve 16, some basic noise reduction and superscale used.
"Junk food souljah!"
Music;
fc_apatride_utd-serbia_99
black_seeds-the_answer
rythm_and_sound_ft_jah_cotton-dem_never_know
nwa-the_dayz_of_wayback
...
https://www.youtube.com/watch?v=CUjHSHxJ8Y4
Micro Motor Warehouse CL-0615-14 coreless motor
https://micro-motor-warehouse.com/collections/all-motors/products/cl-0615-14
I still think these motors require more break-in time. These were more NOS parts I had from my busted Rakon-framed Inductrix. So far they don't feel all that different to the stock H8 motors. I have some -17's on the way to test. ($2.50/4 on clearance from airblade)
I was hoping for some improvement, but so far the only blatantly noticeable factor has been the Silverware firmware mod itself. The search continues for the ultimate ~25g freestyle FPV quad. The props are in view, so figure it out (though this vid is more for my reference);
1: "Gemfan 50mm" / "Blade Nano QX" prop; really wobbly. They lack punch, and response. I suspect they have more angular momentum, so it would need to be tuned differently. The last quarter of the throttle would cause dipping.
https://www.banggood.com/4-Pairs-Gemfan-50mm-ABS-Propellers-For-80-100-Class-Frame-Kits-6-8mm-Coreless-Motors-p-991023.html?akmClientCountry=America&rmmds=cart_middle_products&cur_warehouse=CN
2: "Eachine E57" / "45mm HK Pocket-Quad" prop; less wobbly. They have better punch than the nanoQX, but they feel heavy like they brake less quickly than the stock H8 prop. They wash out more easily, and the top of the throttle range is unpredictable (likely tuning issue).
...
https://www.youtube.com/watch?v=eLQnq9egLkM
Just floating an idea... Badap boom ting! https://www.joann.com/search?q=foam+sheet
Something like this shape; https://cdn.shopify.com/s/files/1/1653/0327/products/DSC00212_2000x.jpg ...only on the top and bottom of the arms... EVA foam stickers (like the landing feet), only made to the dimensions of your frame plates and arms; Could probably poke a hole in them and put a zip tie through them to make sure they don't go anywhere. They might need a classic house shape ????? if you need more buoyant foam volume to float everything, or there could be a couch layer of EVA underneath some ummagrip sold as a sandwiched single product.
...
https://www.youtube.com/watch?v=Fy1v5bJQ4j8
Behind the scenes of this FPV session: https://youtu.be/H9_oqZ3htb4
Another H8 "ImmersionRC PowerPlay DVR" session edit. Shout out to my favorite H8r's:
[Sub 250g FPV] https://www.youtube.com/channel/UC9DcRb_jT99z3GDrDkvud4g/
[Garden Flyer] https://www.youtube.com/channel/UCaMgx2PF4INorq2p_oqPWLg/
[frank4wing] https://www.youtube.com/channel/UCEsfOEgWs7NPw1axSbe7bzg/
About 0°C, 4-7am... This time I really did break the frame, though I've got plenty of spares. Next H8 video will feature "Silverware NFE" and fresh motors. It seems I can't wear out a set of 6mm brushed motors before I break one of them enough to cause uncontrollable yaw spins at high throttle.
25-gram AUW Eachine H8 w/ Silverware. It's been dunked in a lake, probably 200+ packs through it, crashed a hundred+ times. On the 2nd AIO Camera, 2nd power connector and 3rd set of motors.
Recorded solely on the ground;
https://www.immersionrc.com/fpv-products/powerplay/
https://www.immersionrc.com/fpv-products/rapidfire/
https://www.fatshark.com/product/hdo-fpv-goggles/
https://caddxfpv.com/products/beetle-v1
Edited with DaVinci Resolve 16.
Music;
Origin Unknown - Valley of the Shadows
Seti - Listening
...
https://www.youtube.com/watch?v=NvVW2_M19Ug