Making and setting bezels for silver necklaces [Beginner’s Guide]
This video will show you how to make and set two different kinds of bezel wire. I wanted to show how much more work it takes to set a plain bezel compared to some gallery wire. I also point out how the gallery adds a lot more detail to your piece with a lot less work.
Thank you to Metalsmithing-tools.com for supplying me with the pitch that I used in the video. Check them out at https://www.metalsmithing-tools.com for pitch and other awesome tools for doing chasing work.
Also thank you to Otto Frei for supplying with a lot of the tools I use in this video. Check them out at http://www.ottofrei.com/ and if you need any tools or silver and you also like saving money, use code GMCSAW at checkout.
His is a full list of all the items used in this video. If any of the link are broken please let me know so I can fix them.
I will show you step by step how to make these beautiful mixed metal rings and how to get this awesome finish.
Big thanks to Ridge for sending me this wallet and supporting the channel! Here’s the site if you
want to check them out. http://bit.ly/RidgeWallet-GomeowCreations Use Code “GOMEOW” for 10% off your order! ??
FRETZ Spinner Ring Maker - http://bit.ly/SpinnerRingMakerFRETZ
FRETZ Stamping Hammer - http://bit.ly/FRETZ-StampingHammer
FRETZ Starter Hammer Set - http://bit.ly/FRETZ-StarterHammerSet
2lb Brass-Head Mallet- https://bit.ly/2lbBrassMallet
Steel Mandrel Gold Standard - http://bit.ly/GoldRingMandrel
Finger Ring Sizer Gold Standard - https://bit.ly/RingFingerSizer
Ring Stretcher - https://bit.ly/RingStretcher
Haymaker Saw Frame - https://bit.ly/HaymakerSawFrame
NANO Jeweler's Saw Blades - https://bit.ly/NANOSawBlades
Polishing Master Kit - https://bit.ly/PolishingMasterKit
Foredom k.2230 - http://bit.ly/K2230
Basic Smith Little Torch Five Tips - https://bit.ly/SmithLittleTorch5tips
Premium Bench Block 6" x 6"http://bit.ly/PremiumBenchBlock
Copper Sheet (Various Sizes) - https://bit.ly/CopperSheets
16 Ga Solid Brass Wire - https://amzn.to/38gE7r2
Tripod Soldering - https://amzn.to/3exo4pK
Bench Pin and Anvil - https://amzn.to/2U2nsiM
Heavy Gauge Mesh Screen - https://amzn.to/3la9xD1
Hard Charcoal Block - https://amzn.to/3l8nIID
Handy Flux - https://amzn.to/3l73X4m
Third Hand Plier/Tweezers - https://amzn.to/36gea8x
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
https://GomeowCreations.com/tools-and-materials
https://GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can sign up a monthly donation via my Subscribestar for as little as $1 per month https://www.subscribestar.com/gomeowcreations
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#spinnerring #jewellerymaking #jewelrymaking #goldmaki
...
https://www.youtube.com/watch?v=5EdXcZEhXtk
Check out the new Photon Zero and how it stacks up to the original Photon.
ANYCUBIC sent me the new Photo Zero so I made an unboxing video and go over everything that came with it. I also do a quick comparison between the Photon Zero and original Photon 3d resin printer.
*** This video is a re-upload and re-edit due to it no longer coming up in search for some reason. Instead of getting mad I took this opportunity to add more info to the video with some prints so I guess this is not all bad ***
ANYCUBIC Photon - https://amzn.to/3aTRP1X
Reusable Silicone Funnels & Resin Filter : https://amzn.to/39WTP8v
ANYCUBIC Photon Zero - Not released yet but I will update you when I get the info.
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can send me tools or materials that I can use in videos to my P.O. box:
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#ringmaking #inlayring #rollingmill #pepetools #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy
...
https://www.youtube.com/watch?v=rHWO-iNzpxU
I will show you have to make metal balls from copper, brass and silver. This will also allow you to make the same size ball every time.
Here is a list of all the tools and materials that I used in this video - https://amzn.to/2T2ZFgD
----------------------------------------------------------------------------------------------------------
Check out Mint Mobile and get your $15/mo phone plan -
https://mint-mobile.pxf.io/c/1258336/444520/7915
Would you like your own "Rings Are Just Fancy Circles" Shirt or mug? If so here is the link -https://teespring.com/stores/gomeowcreations
----------------------------------------------------------------------------------------------------------
I'v made a video that shows you just about every tools I uses for every project I make. It also has likes to every tools in the description on that video. https://youtu.be/w5MmEC5Bv8U
If you'd like a full list of my tools and materials along with where to get them check out my website. https://www.gomeowcreations.com/recommended-tools-and-materials/
----------------------------------------------------------------------------------------------------------
Other than this "How to make metals balls - Copper, Brass and Silver" video I have a growing selection of other videos with new tutorial videos coming out every week. Subscribe to my channel so you'll be updated whenever a new video goes live!
----------------------------------------------------------------------------------------------------------
If you would like to send any materials, tool or anything really free to send them to my PO box and I will make sure to give you a shout out and use them in a future video.
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
----------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------
Thank you for watching my videos and I hope I was able to help your learn a little more about making jewelry
Do you have a question or maybe just want to say "Hello"? Well just leave a comment, I will try to get back to you asap.
If you would like to share your work with me feel free to email it to GomeowCreations@gmail.com
----------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------
Help support the channel on Patreon -
https://www.patreon.com/GomeowCreations
Gomeow Creations website - http://gomeowcreations.com/
Instagram - https://www.instagram.com/gomeowcreations
Facebook - https://www.facebook.com/gomeow.art
Pinterest - https://www.pinterest.com/G
...
https://www.youtube.com/watch?v=lkxe2O4HD7c
How To Use A Jewelers Saw the Right and wrong way.
I want to show how to use a jewelers saw to cut out whatever you need from sheet metal. I will show and tell you how to do it the right way and how to do it my way, "the wrong why".
If you have any question please leave a comment a I will get back to you asap.
Check out my website for all of my work.
http://GomeowCreations.com
From my website you can get all of my social media.
----------------------------------------------------------------------------------------------------------
If you would like to send any materials, tool or anything really free to send them to my PO box and I will make sure to give you a shout out and use them in a future video.
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
----------------------------------------------------------------------------------------------------------
Shopping list:
Micro Drill Bits:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=10pc+1%2F8%22+Micro+Drill+Burr+Bits+0.4mm+to+2.2mm+Circuit+Board+Jewelry+Electronics&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Jewelers saw 6" frame:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=JEWELERS+saw+6%22+frame&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Jewelers saw 3" frame:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=Jewelers+saw+3%22+frame&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Jewelers Saw Blades Set:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=Jewelers+Saw+Blades+Set&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Polishing wheels:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=dremel+polishing+wheels+cloth&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Polishing Compound:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575090523&toolid=10001&campid=5337721101&customid=&icep_uq=Fabulustre+Compound&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_m
...
https://www.youtube.com/watch?v=V9WnHVHh2JM
This is just a quick video to show you how to repair a broken honeycomb soldering board.
If you just want to get a new one here is a link: https://amzn.to/2y4gdPP
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can send me tools or materials that I can use in videos to my P.O. box:
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#Honeycomb #diy #Soldering #pepetools #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy
...
https://www.youtube.com/watch?v=_uUeMuFlEMU
Hey, if you are looking for jewelry tutorial videos you came to the might place! ??
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes
*If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount https://www.paypal.me/gomeowcreations
3. You can sign up a monthly donation via my patreon for as little as $1 per month https://www.patreon.com/GomeowCreations
4. You can send me tools or materials that I can use in videos to my P.O. box:
Gomeow Creations
Randy May
24930 Washington AVE
#1008
Murrieta CA 92564
5. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#ringmaking #inlayring #rollingmill #pepetools #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy
...
https://www.youtube.com/watch?v=hiljLzhs_4I