Got called out to look at a Explorer that wouldn't come out of gear, just took a quick look at it and found the shifter shaft was completely broke in half, interesting - my guess is cable needs to be replaced too. Once I get the parts a new video will show replacement.
...
https://www.youtube.com/watch?v=pue6_4UXyZk
This car failed state inspection for ball joints that were just replaced less than 2 years ago, here I check them and show why it doesn't need anything.
...
https://www.youtube.com/watch?v=natRfJe7Rg0
This video is how to do a idle relearn on Mazda 3 with the 2.0. If you are having idling issues and dying issues and you changed the battery or had it disconnected this is the info you need
...
https://www.youtube.com/watch?v=KOxiqD_UUdQ
This car was not warming up fast enough sometimes as long as 15-20 minutes before it would get to a acceptable level. The fans etc were not coming on and the coolant level was correct so we swapped the thermostat and it only took less than 7 minutes in about 30 degree weather to reach temp
...
https://www.youtube.com/watch?v=TKRDYz-Xgms
installing a ATK 351 Windsor crate engine into a 67 Cougar thats been sitting dormant for 20 years that had a 289 originally. Not totally straight forward, need different alternator and power steering brackets. This isnt a step by step video more of a showing the car and engine.
...
https://www.youtube.com/watch?v=7D5JpZ3sB-w
This Allison would eventually reach 280 degrees or so and sometimes go into limp mode. If it sat for a short period it would almost always peg the needle to full hot even though the transmission was not hot. The transmission worked flawless, no slippage, fluid luke warm to touch etc. This is a lot of talking and the steps I took to resolve this issue.
...
https://www.youtube.com/watch?v=5qwhfTwHasw
Someone had already replaced one of the belt tensioners when she brought it to me for the noise. If you have a chirping or squealing noise on your v6 Ford Engine 3.8, 4.0, etc.. always listen closely to your camshaft synchronizer that can be a culprit. I was actually in the process in making a whole video on how to replace the synchro itself but lost some of the footage, so this is just a demonstration of the noise it can make.
...
https://www.youtube.com/watch?v=3deqxz7pck4
Previous person that worked on this jeep tried fixing a few electrical issues and ended up WAY over tightening the steering wheel onto the shaft.
...
https://www.youtube.com/watch?v=9Ga4291swxA
This is a 1998 Honda Accord that I removed stock steering wheel, air bag, clock spring to install a short hub along with a quick release steering wheel. If you arent installing a different steering wheel this video still shows how to remove the stock steering wheel and how to remove clock spring,
...
https://www.youtube.com/watch?v=mbCnzAPo8gA