For Auto Body and Paint Supplies visit http://www.CollisionBlast.com/Supplies For FREE access to training at http://CollisionBlast.com DIY Por 15 Part 1 - How To Prep Rust Before Applying POR 15 using Marine Clean and Metal Ready.
For rusted metal, such as the floor board on this mustang, there are two options when prepping for POR 15. The first option, I am going to demonstrate in this video. The second option is to have the metal blasted to bare metal.
MARINE CLEAN is a complex mixture of organic & inorganic chemicals. It is non-toxic, biodegradable, water-based, and has no noxious odors nor chlorinated solvents. It doesn't contain any petroleum products and has no flash point. Marine Clean repre- sents a revolutionary breakthrough in cleaners, degreasers and dispersants.
Use MARINE-CLEAN for cleaning and degreasing machinery parts, turbine blades, diesel engines, compressors, transformers, bulkheads, deck plates, bilge areas; removal of oily deposits found in closed systems such as air conditioning, boiler tubes, compressor lines, heat exchangers and coils; removal of light distillates, mineral oils, heavy grease, degreasing all metal surfaces, plastics, wood, fiberglass, painted surfaces. Always wear eye protection and rubber gloves when using Marine Clean.
PREP & READY provides the best adhesion for POR-15® on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe PREP & READY to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. PREP & READY is not caustic, corrosive, toxic or flammable
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Music
Licenced track: Michael Conn "Dare"
Cuesongs.com
Looking For Paint Supplies? Check out http://www.collisionblast.com/paint-supplies for the best online prices and receive front door service. Looking For More Training? Visit http://CollisionBlast.com to Subscribe For Access To Hours of FREE Training. Let's make your Dream Car Become A Reality.To stay updated with upcoming videos and hours of free training, visit http://CollisionBlast.com - - In this video, 3M is going to demonstrate how to professionally apply window tint to a curved back glass.
This is a video I took at SEMA 2011 demonstrating how to window tint professionally. Window tint has been around for a long time. However, tinting curved glass, such as a back window has always been a challenge. Now you will learn a method that makes this a very simple process. Knowing a few of the tricks of the trade can make the job much easier.
Sit back and learn how the professionals at 3M do this.
Auto Rust Repair Information at http://CollisionBlast.com
Rust not only looks bad, but will continue to spread if not taken care of. Rust should be taken care of as soon as you first notice signs of rust present. If repaired early enough, a patch panel will not need to be made. You should be able to remove the rust and use the remaining metal with cutting and welding.
However, if there is a whole, the rust has eaten completely through the metal and require cutting a section out and welding a new piece in.
This is part 1, which we will discuss how to identify, mark and cut the rust hole.
For more rust information, visit http://CollisionBlast.com/AutoRustRepair
http://EliteAutoBodyKS.com - This is a video podcast with Patrick Sampoll, Elite Auto Body. Patrick attended and completed the automotive and collision repair programs at Butler Community College. Now he owns and operates his own business. Patrick tells us a little about his business, the challenges he faces, and a bit of advice for students that are currently training or considering the collision repair industry as a career pathway.
http://CollisionBlast.com This is cool check it out. This is a quick video that I took while attending NACE in Las Vegas. This is creative and a good idea. People were loving it! There were some great training and met some people. Check back later for another video about NACE.
Car burnouts and drifting at SEMA 2016. In this video I am talking about being burned out and new things I'm doing to eliminate being burned out and I have some footage of car burnouts and drifting at SEMA. See pics of boat and bike athttp://www.collisionblast.com/2016/11/22/burnout-or-burned-out/ FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/h6j0E776N60
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
http://CollisionBlast.com - If you did not have the opportunity to attend the 2012 SEMA Show in Las Vegas, don't worry! We'll be posting updates for you to watch on YouTube.
A few of the celebrity's t SEMA include: Chip Foose, Jessi Combs and Chris Jacobs from Overhaulin. Courtney Hansen for PowerBlock; Forrest Griffin UFC MMA; Ray Evernham, and many more.
A few of the companies I will be highlighting include: 3M, Motor Guard, Matrix, CP Tools, and several others. I will also be touching on some of the training at SEMA.
Jess explains how to read the numbers on a car or truck tire sidewall. Each number and letter specifies the size and type of tire. It is important to know this when considering buying new tires. Not all tires are equal in quality and size.
FREE access to training at http://CollisionBlast.com - In this video....
Share this video http://youtu.be/q_igDSD_B3M
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
http://CollisionBlast.com Putty glaze or glazing putty is a thinner filler used to fill pin holes and other small imperfections. It applies smoother and sands easier than body filler. It also does a good job of leveling the different layers of body filler and paint coatings.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.