I put my Samsung Galaxy Note 4 on my near one year old walker runner 250 and sent it up. It tops the scales at 2 pounds 2 oz. I flew line of sight with the battery a 4s 2200 battery. She flew remarkably well and I was amazed though still quite nervous about having such a beat up quad carrying a $400 piece of electronics. It all turned out well though, flight was cut short due to low transmitter battery. ... https://www.youtube.com/watch?v=n5eBn57ElNA
OK here we go, $12.99 frame with led, props, and pdb, Grayson hobby (online) $35 for set of 4 2204 2300kv motors (ebay- China) $8. Cc3d (banggood.com) $28 4way escape 12 amp (ebay) $22 2200mah battery (ebay same as used on walker runner 250 25c) now I already had a controller but hobby king has a $25 6 channel one with receiver. For fpv I would go to ebay for a ts5823 32 channel 5.8 video transmitter around $20 or less and a rc832 5.8 receiver around $20 or less. Screen is simply a $15 made in China one that you can find on banggood or ebay. Grand total around 165.99 give or take $20 for shipping. You can save more by going all China as they can ship cheaper than we can but you will have a long wait. Hope this helps. Also you can get better batteries for not much more at 2dogrc.com I hope to soon work with them to get a f1fpv discount they also have great deals on the larger multirotors in case you want around a 450 quadcopter. Hope you enjoy this and look for the fly test of the tilt rotor quadcopter racer soon. www.tilt.com
...
https://www.youtube.com/watch?v=XheuraAhznI
F1-FPV hosted a race on Sunday at Hi-stakes hobbies in Wake Forest, the event lasted for some 3 hours and some quads were harmed during the filming.
...
https://www.youtube.com/watch?v=ls59fiUzguk
Ok, A former member decided he wanted to cruise a bit with an awesome little trainer craft from hobby zone, Here is his fpv feed.
this thing glides for days.
...
https://www.youtube.com/watch?v=r_hQMykLtU8
After 3 sussesful rolls yesterday I decided to play around a bit more. Title says it all.
I only broke one arm and packed some dirt, OK mud into #1 motor. I did hit my oh $#!+ button before hitting the ground but still hit rather hard.
These were Los flips and rolls and I have to say rolls are easy back flips are hard but front flips with a bright sun behind clouds sucks. I lost my orentation and had to bail.
...
https://www.youtube.com/watch?v=UpTgjHeHZjM
this old dell was bought in 2009 and still can keep up with some even high end computer these days. xps8100 with 12gb mem and a gtx 680 gpu, works fine. I could have even done it at 4k but, it takes quite a bit of time, and the 3d videos, they take forever to render and stitch.
Craft: DJI Mavic Air 2
Local: Maple View farm & Dairy
...
https://www.youtube.com/watch?v=fGqHyySCw9M