Second session for my IoT Introduction 2019. Today, we are working on the terms cloud, edge, and fog (a bit on swarm too) in IoT. Then we will look at some basic hardware buses, and then have a very brief introduction in story driven development.
Welcome to a small mini series covering the automation of my own apartment in Brasilia.
So many light bulbs and light switches in the living room - impossible to remember, what switches turn on which set of light bulbs. And that long way to get the coffee machine started in the morning...
Time to do some automation.
In the first parts of this series, you can follow me on my path to getting the living room straightened out (some funny surprises included), the coffee machine turning on automatically, and some open source voice assistance. And see IoTempower in action.
In this part, I will cover the hardware I intend to use for the automation:
These are mainly:
- Philips hue light bulbs and a v1 bridge (the old version works fine in my setup)
- Milight light bulbs and a wifi gateway
- Several sonoff basic
- A main component: several Sonoff T1 3 gang (2 channels)
- Several google aiy kit
- Used android tablets
- The Guleek mini pcs depicted here died unfortunately, so we are using raspberry pis and old Lenovo laptops instead (other options: Atomic Pi, Labrador from Caninos Loucos)
- a USB FTDI adapter for programming
In the next show, I am going to show you how to put your own software onto the Sonoff T1 3 Gang: Flash Sonoff T1 3 Gang: https://youtu.be/D7ekFGcUGXU
Some of you might remember that all of these part where one 30 minute movie to start with, but I think they are easier to digest in this new short format. Let me know in the comments if you agree. It also gives me the option to extend this series to show you how to setup several voice satellites, a scale, and our fully automatic home cinema system. Leave a like, if you want to see that too here.
Most of the editing and all the filming was done by Renato Perotto (https://www.instagram.com/renato_perotto/).
Make sure to subscribe and comment as well as check out:
- IoTempire: https://iotempire.net
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
I am also now on lbry, check my channel there too:
lbry://@ulno#2
The music track used is "Faster, Sons Of Vengeance, Faster!" by Doctor Turtle from here https://freemusicarchive.org/music/Doctor_Turtle/Hasta_La_Blister_Longer_Guitar_Instrumentals/Faster_Sons_Of_Vengeance_Faster
Stay tuned and see you soon back here in the IoTempire.
#makers #IoT #IoTempire #diy #arduino #raspberrypi #opensource #nodered #Node-RED #mycroft #mycroft.ai #privacy
...
https://www.youtube.com/watch?v=IKr6w0whR-U
I just built this for the Nova Maker Faire 2017. Please come and read more on all things shown here on http://ehome.ulno.net
...
https://www.youtube.com/watch?v=oS3njH3iLxM
Seventh session for my IoT Introduction 2019. In this class, I am walking you through some of the internals of IoTempower.
The class website is here: https://ulno.net/teaching/iot/intro/
I hope you enjoy this, check out my other videos and leave feedback and discuss here, on facebook, or on riot/matrix.
Make sure to subscribe and comment as well as check out:
- IoTempire: https://iotempire.net
- IoTempower: http://github.com/iotempire/iotempower
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
#iot #iotempire #esp8266 #nodemcu #esp32 #raspberrrypi #arduino #platformio #integration #node-red #nodered #iotempower
...
https://www.youtube.com/watch?v=cffB5jF3W9o
Getting depressed in a dark office? Stay tuned and follow our diy artificial window build series.
Inspired by Matt on DIY Perks at https://www.youtube.com/watch?v=V5uycGosYq4
However, we will take it to the next level and add color, animation, and sound.
Also visit my editors and producers of this video:
- Granmidia,: https://www.instagram.com/granmidia.produtora/, https://www.youtube.com/user/sylvio16
- Hernane Pinto: https://www.instagram.com/hpinto/
And don't forget to check these web-sites and my own Instagram account:
- IoTempire: https://iotempire.net
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
#makers #IoT #ledstrips #IoTempire #diy
...
https://www.youtube.com/watch?v=0Flbop9o114
Eleventh session for my IoT Introduction 2019. In this class, we will see a lot of small IoT projects with a strong focus on their use in the arts and performance.
The class website is here: https://ulno.net/teaching/iot/intro/
I hope you enjoy this, check out my other videos and leave feedback and discuss here, on facebook, or on riot/matrix.
Make sure to subscribe and comment as well as check out:
- IoTempire: https://iotempire.net
- IoTempower: http://github.com/iotempire/iotempower
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
#iot #iotempire #esp8266 #nodemcu #esp32 #raspberrrypi #arduino #platformio #integration #node-red #nodered #iotempower
...
https://www.youtube.com/watch?v=pUg3aesSclI
Eighth session for my IoT Introduction 2019. In this class, we finih the FLOGO mqtt integrator, learn how to program a driver for IoTempower, how to use esp deep sleep, and see and review a small introduction into LORA.
For the dicussion on LORA, I refer to Andreas Spiess' movie here: https://www.youtube.com/watch?v=hMOwbNUpDQA
The class website is here: https://ulno.net/teaching/iot/intro/
I hope you enjoy this, check out my other videos and leave feedback and discuss here, on facebook, or on riot/matrix.
Make sure to subscribe and comment as well as check out:
- IoTempire: https://iotempire.net
- IoTempower: http://github.com/iotempire/iotempower
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
#iot #iotempire #esp8266 #nodemcu #esp32 #raspberrrypi #arduino #platformio #integration #node-red #nodered #iotempower #lora #flogo
...
https://www.youtube.com/watch?v=pSjeRapINWU
We want to share with you here our very intense and astonishingly quick journey of designing, prototyping, testing, building, and deploying the INSPIRE ventilator inspite and because of the raging pandemic in Brazil. Several years of experience in our Caninos Locus group using and designing open software and open hardware as well as an amazing team of people from diverse fields, several philanthropists, and supportive administration made this impossible endeavor possible.
You will hear about the Labrador single board computer and the Pulga microcontroller both designed and manufactured at the University of São Paulo. We will show how communication of highly motivated experts, the pressure of the global crisis, and experience in open source and open hardware development were key points in getting where we are today. We will share some pitfalls and struggles with regulations and legal challenges, but also show all the positive energy of all people and institutions involved, leading to a resounding success.
And at the end, we will dare to cast a positive look into the future and hopefully encourage you to share and apply our open source knowledge to drive the future.
Resources:
- https://caninosloucos.org/
- Event at Fossasia: https://eventyay.com/e/fa96ae2c/session/6916
...
https://www.youtube.com/watch?v=JdJGABDoQ5g
This was a pretty spontaneous production inspired by a big clean-up operation by our special camera guy and editor Sylvio from Granmidia (https://www.instagram.com/granmidia.produtora/).
He found lots of headphones used for studio production and thought we could give it a spin and maybe a funny twist here in the IoTempire (https://iotempire.net). I threw in a couple of my own as well as a little surprise, and we were ready to shoot. Unfortunately, it got a little longer than expected, but we think there are still lots of funny moments to explore - I also compiled a lot of timelinks for relevant content, so feel free to read on and jump over lengthy parts.
Let us know what you think of this format in the comments. If you want more like this, please encourage us (and also suggest which type of devices you would like to see) below in the comments.
We tested the following headphones (pre-fixed by the actual times where we test them and also listing their time of the test result as well as its final rank), the summary is at 23:57:
- 02:03 Sennheiser HD650 (result: 05:07, rank: 2) - link: https://www.amazon.com/Sennheiser-HD-650-Professional-Headphone/dp/B00018MSNI
- 06:42 Sony MDR 1A (result: 08:33, rank: rank 4) - link: https://www.amazon.com/Sony-MDR-1A-Headphone-International-Warranty/dp/B00NW353KE
- 10:52 Sennheiser Momentum (result: 13:41, rank: 3) - link: https://www.amazon.com/Sennheiser-Momentum-Headphone-Brown/dp/B009QV15DU
- 15:47 Sony MDR 75 06 (result: 18:16, rank: 1) - link: https://www.amazon.com/Sony-MDR7506-Professional-Diaphragm-Headphone/dp/B000AJIF4E
- 20:00 Plantronics Voyager Focus (result: 22:28, rank: W3) - link: https://www.amazon.com/Plantronics-Voyager-Bluetooth-202652-01-Cancelling/dp/B013F4LJTI
- 24:08 Kokoon (result: 26:28, rank: W1, only one, I could sleep in) - link: https://kokoon.io/
- 28:18 Sennheiser Momentum Wireless (result: 30:35, rank: W2) - link: https://www.amazon.com/Sennheiser-True-Wireless-Bluetooth-Fingertip/dp/B07J2WF2JW
- 36:12 Surprise - 3M Peltor X (result: 32:26, rank: awesome in its own realm) - link: https://www.amazon.com/3M-Peltor-Over-Earmuffs-X5A/dp/B00CPCHBCQ
The links are not affilate links (we need more subscribers and viewers to support us - spread the word!), so feel free to google for the products also on your own and check on ebay or other seller sites.
We used the following music pieces for testing:
- Thalía - De Dónde Soy: https://www.youtube.com/watch?v=NoLnjhZdx7Y
- Verdi - Dies Irae - Gardiner - Monti Verdi Choir: https://www.youtube.com/watch?v=2j_NqiWURJc
- Ola Onabule - Every Prey - Seven Shades Darker: https://www.youtube.com/watch?v=5bcCrF7B8bc
- Tom Jobim - Samba do Avião: https://www.youtube.com/watch?v=sbWt1JrAYiE
We hope you enjoy the content, please subscri
...
https://www.youtube.com/watch?v=4g4RSxCNrZg
As you see I am fascinated by voice assistants, but I don't like them sending things into the cloud. Do I really want Google, Amazon, Apple, and Microsoft listen and analyze every word I say in my private four walls? How about voice assistants in an industrial setting - is it OK there to send everything to an external cloud provider? Not sure that such solutions will be easy to sell. And what happens when the Internet is down?
As excited as I initially was with Mycroft (https://mycroft.ai), I was a little disappointed to find out that they use (their own) third party cloud service to do speech to text. However, Mycroft is open source, so it allows me to exchange this service. After discovering Rhasspy (http://rhasspy.org, https://github.com/rhasspy/rhasspy-voltron, a system especially focusing on offline voice assistance).
I still like Mycroft and its community a lot, so what to do?
Hey, I am a software engineer, I thought: "I can glue systems together that don't have explicit interfaces for each other". So, let's use Node-RED (https://nodered.org) as glue!
Follow along in this mini-series. The series has 3 parts, we are now in the second and installing Rhasspy:
1. Installation Mycroft: https://youtu.be/-fYOf4WBvzk
2. Installation Rhasspy: https://youtu.be/xKgPrn8ukcM
3. Integration with Node-RED: https://youtu.be/hZwv80gB8f0
If you want to see the rest of the documentation with code examples, check this document here: https://github.com/ulno/doc/blob/master/videos/2020-04-25%20Rhasspy%2C%20node-red%2C%20mycroft/part2/desc.md
Links to all projects:
- Mycroft: https://mycroft.ai)
- Rhasspy: http://rhasspy.org, https://github.com/rhasspy/rhasspy-voltron
- Node-RED: https://nodered.org
And don't forget to check these web-sites and my own Instagram account:
- ulno's site: https://ulno.net
- ulno's Instagram: https://www.instagram.com/ulno_net/
- IoTempire: https://iotempire.net
I am also now on lbry, check my channel there too:
lbry://@ulno#2
As usual, stay tuned and see you next time!
#makers #IoT #IoTempire #diy #arduino #raspberrypi #opensource #nodered #Node-RED #rhasspy #mycroft #mycroft.ai #privacy #opensource
...
https://www.youtube.com/watch?v=xKgPrn8ukcM