ZitaFTP Server Prerelease Coming Soon to AmigaOS 4.x
Here's a small peak at something I've been working on.
ZitaFTP Server is an FTP(S) server that's: - Fast - Secure - Supports multiple simultaneous connections - And more
It's still a work-in-progress, but is useful enough that - all going well - a pre-release version will be released for AmigaOS 4.x on Tuesday 20 August 2019.
When you're writing a network server, you may be tempted to create your own encryption algorithm to protect data. In this video I explain why that's a bad idea...
Click the following link for a summary:
https://keasigmadelta.com/blog/why-you-shouldnt-write-your-own-encryption-algorithm
...
https://www.youtube.com/watch?v=PO6H_gQ3Fh4
Yes, it's finally here! You can download, try & buy Zita FTP Server for AmigaOS 4.x now. Just follow the link below:
https://keasigmadelta.com/zitaftpserver
ZitaFTP Server is a fast and secure file server. Use it to transfer files between your machines/devices using the FTP and/or FTPS protocols.
...
https://www.youtube.com/watch?v=8XipIP-petY
I needed to upgrade my laptop with more memory and a faster (and bigger) hard drive. This is a golden opportunity to take a peek inside, and look at how the laptop was designed. Hopefully, it'll help with the DIY Mini-ITX laptop project (when it's restarted).
Click the following link for a full summary:
https://keasigmadelta.com/blog/lets-take-a-peek-inside-the-asus-rog-g501vw-laptop
...
https://www.youtube.com/watch?v=Mv9rcwvmiSE
You're building your own laptop and want to choose a good LCD panel for it. What specifications matter the most? What should you be paying the most attention to. Watch the video to find out...
...
https://www.youtube.com/watch?v=fY1EQn2cCLQ
Technology enables amazing things... when it works. When it fails, it's a frustrating time sucking mess. In this video I talk about the latest incident of something small turning into a nightmare.
Click the following link for a summary:
https://keasigmadelta.com/blog/technology-is-great-when-it-works-when-it-doesnt-zitaftp-delayed
...
https://www.youtube.com/watch?v=6qlMFUntnaU
Part 7 of this challenge looked great, until Scarfy walked too far in either direction. At that point it's obvious that the ground was totally faked with a static offset. It's time to do proper physics simulation, so that Scarfy can jump and run through his environment for real. That's what we achieve in this video...
Click the following link for a summary, and to download the code:
https://keasigmadelta.com/blog/raylib-2d-challenge-part-8-walking-on-terrain-simulating-physics
...
https://www.youtube.com/watch?v=chbQoe8AVIc
What to do when you have a toddler who you'd like to empower with independence, but your light switches are too high? And what can you learn from the solution to this simple problem? Watch the video to find out.
Or, Click the following link for a summary:
https://keasigmadelta.com/blog/engineering-and-life-lessons-from-a-diy-light-switch-extender
...
https://www.youtube.com/watch?v=xx380-q7irg
Learn how to quickly set up your "dev environment" on Linux for C++ programming. This short tutorial shows you how to install GCC/G++, CMake, and Visual Studio Code (a.k.a., VS Code). You'll be up and running in no time.
Click the following link for a summary:
https://keasigmadelta.com/blog/getting-started-with-c-on-linux-setting-up-gcc-cmake-and-vs-code
NOTE: This video is an excerpt from The CMake Tutorial: https://cmaketutorial.com
...
https://www.youtube.com/watch?v=DMSROwPyhAE
This video was inspired by a comment suggesting a video series on build systems. While I could do that (and will), pretty much all C/C++ build tools do the same thing, with the exception of odd-balls like CMake and Premake.
In this video Hans explains how C/C++ build systems work, and why CMake and Premake are different.
Click the following link for a summary:
https://keasigmadelta.com/blog/how-every-c-build-system-works-except-for-cmake-and-premake
Other useful resources:
- Learn how to build software with C++'s de-facto standard build system: https://cmaketutorial.com/
- Learn OpenGL ES 3 + SDL2: https://keasigmadelta.com/gles3-sdl2-tutorial
- More made by us: https://keasigmadelta.com/store/
- Support inquiries: https://keasigmadelta.com/support/
Connect with us:
- https://facebook.com/KeaSigmaDelta
- https://twitter.com/KeaSigmaDelta
- https://t.me/keasigmadelta (Telegram)
- https://keasigmadelta.com/subscribe/
QUESTION - What would you like us to make next, on this channel? Comment below...
About
At Kea Sigma Delta we enjoy creating awesome stuff using software & electronics, and helping others to do the same.
...
https://www.youtube.com/watch?v=2s75npa5IIY