How to play music through your mic in steam games UPDATED LINKS 2018
READ THE DESCRIPTION!!!!!!!!!!!!!!!!!!
In this video I explain how to play music through your mic for people to hear in-game through the direct communication built into most steam games, NOTE you can no longer talk to people while doing this. you have to setup teamspeak3 and talk to your friends through that. the only way around this I know of is a second sound-card. I don't care enough about this shit to buy a second one, so here's the free way to do it. other videos don't explain this and once setup their way do not work anyway. Do it MY way and you'll be trolling in minutes. have a great day and thanks for watching.
http://addons.teamspeak.com/directory... teamspeak3addon edit: I forgot to tell you you need to set your ts3 voice setting to push to talk(set a key you'll never use, you will get voice activation) in the configure settings for the soundboard enable Voice Activity Detection under the send audio/play audio menu I showed you in the video. And make sure that your recording device for teamspeak3 is set to your default MIC. for a more detailed explanation on how to setup teamspeak3 soundboard go to this link http://www.kampfrausch.de/ts3/ sorry I forgot to explain that. I have better things to do and they can explain it better, because well, they created it.
went to get plugs at my work and thought id try out a walk around with my Sony HDAS50 action camera. need a better SD card so i can shoot the capable 1080p 60fps 50MB/s bitrate
Www.stfrancisthriftstore.com
...
https://www.youtube.com/watch?v=JVB_M1aDQF8
Josh B from Techno Toy Tuning will be noting the measurements and you should have a perfect fit installation in your case.
Hardware changes needed :
2x 30mm studs for the master cylinder & nuts washers lock washers
Remove 15mm from push-rods beveled end
If you need to DIY just grind down the diameter of the push-rod 3mm or so in small increments until it fits into the pin of the master cylinder, you want the rod to bottom out inside the master. Don't force the pin and operate the master without fluid or you could damage the seals.
...
https://www.youtube.com/watch?v=1UvO-elblZE