Rust not only looks bad, but will continue to spread if not taken care of. Rust should be taken care of as soon as you first notice signs of rust present. If repaired early enough, a patch panel will not need to be made. You should be able to remove the rust and use the remaining metal with cutting and welding.
However, if there is a whole, the rust has eaten completely through the metal and require cutting a section out and welding a new piece in.
This is part 1, which we will discuss how to identify, mark and cut the rust hole.
http://CollisionBlast.com/iLLuma - Unique custom paint trick that will add lights to your customized paint job. iLLuma-FX has a really cool system which will, "Bring Light To Your Design." The system shown in the video is for custom painting a motorcycle.
To watch this full screen at:
http://CollisionBlast.com/iLLumaFullScreen
This is done using brass tape, which connect to a power source. Then the front side is filled with putty and painted over with candy. The end result is a awesome custom painted design, but when turned-on, the art work actually lights up.
If you are a custom painter or if you paint motorcycles and you're looking for something unique, you are going to want to check this out.
To learn more about iLLuma-FX visit their website at http://iLLuma-fx.com
http://CollisionBlast.com This is a lesson on how to generate collision repair estimates. In this lesson we are going to talk about why you want to write a thorough estimate.
For Paint Supplies? Check out http://www.collisionblast.com/paint-supplies for the best online prices and receive front door service. Looking For More Training?
Visit http://CollisionBlast.com to Subscribe For Access To Hours of FREE Training. Let's make your Dream Car Become A Reality.hVISIT http://CollisionBlast.com for FREE training offer!
BCC Collision Repair student demonstrates how to apply glaze putty to a repair area that has been repaired and finished out in body filler.
FREE access to training at http://CollisionBlast.com
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
http://CollisionBlast.com - This is a 53 min YouTube video for car ding dent repair DIY auto repair tutorial. I have used several of my videos from the past to make this one step by step video. In this video, you will learn how to repair a dent using a stud welder gun, how to apply body filler, how to block sand body filler, how to mask before priming, how to apply epoxy primer, primer surfacer, and how to block sand primer. Set aside about an hour for the tips, tricks, and training I have for you in this video. This video includes some of my youtube most viewed videos.
http://CollisionBlast.com - Primer Sealer, In this video we'll show the basics steps for spraying primer sealer to an aftermarket fender. The fender has already been prepped. We talk about wiping with wax and grease remover, using self etch primer on bare metal, using a tack cloth, and spraying primer sealer.
http://CollisionBlast.com - Repairing dents using a slapping file is a method for metal finishing technique used on older cars with thicker steel. However, I still find the slapping file helpful with certain dents.
This video will demonstrate how to use the tool. This is a side view of a dent to visually demonstrate how to use the tool. You will need to have access to both sides of the panel to use the slapping file.
For additional DIY help, visit http://CollisionBlast.com/DIYHowToGuides
Elvis' Last Ride, a Stutz Blackhawk III, Makes its Preservation Debut at the April 3-6 AutoFair Hosted by OldRide.com
Dale Earnhardt Jr Debuts Preserved Vehicle at Charlotte Motor Speedway
http://youtu.be/UqAnoUKHQPM
FREE access to training at http://CollisionBlast.com
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.