Auto Body and Paint Quiz - Questions and Answers - Test Your Knowledge
http://CollisionBlast.com/PaintQuiz - This is a auto body and paint quiz from questions asked by you. Take the quiz and see if you have the same answer
http://CollisionBlast.com - Candy Custom Paint - This video is a auto body and paint Q&A for custom paint coatings such as tri coats, candy paint, pearls, etc. We'll discuss what a tri-coat paint job is and tips for matching a tri coat pearl or candy paint job.
The front end parts were already removed when we bought the car. I will have to find and replace those parts when we start putting the car back together. Next, we removed the front fenders. As we mention in the video, one of the most important steps is keeping your hardware and parts organized. Whether you are going to have a car tore apart for a few weeks or a few years, this will make the reinstallation much easier.
One way to do this is to get some zip lock bags and label one for each panel that you remove. Put all the hardware and small parts into the bag and label the bag accordingly. Another way is to screw the bolts back into the bolt hole after the part has been removed. This work well, but may get in the way when working or painting the parts. Whatever method you choose, just make sure everything will be easy to lay out and put back together when the time comes.
You may have to remove adjacent parts to get to the part you are wanting to remove. On the mustang, we had to remove the rocker panel molding, to give us full access to the fender. Once the molding was removed, we removed the right front fender by using a 1/2 socket, 1/2 wrench, phillips screw driver, and the bags and marker to properly store the hardware.
Tips:
Some of my students have been confused which is the right side and the left side of the vehicle. The way you determine which side is which is to sit in the vehicle. When sitting in the car, youll notice your right hand is your passenger side, which is the right side of the car and your left hand will be the drivers side, which is the left side of the car.
If you project is going to be tore apart for a long time you may consider taking pictures before you tear it apart. This will help you remember how things go back together.
If you have bolts that are hard to remove, you may try to heat the nut or bolt using a small torch. Be careful not to burn any wires or get close to anything flammable.
FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/XYAYqwQriIc
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
http://CollisionBlast.com/AutoShow - The show for consumers. This is a show that tests and reports the tips, tricks, products and rumors to see if they really work for the end user. Donnie will put this to the test whether the product or technique works or not.
This show is with the end user in mind. With all of the advertising, hype, and rumors out there today, it's hard to know if something really works or not. Consumers spend $$$$ on auto related products to discover that they do not work as described. However, there are some great products out there as well.
Subscribe to the new auto show to see what works and does not work for me.
FREE access to training at http://CollisionBlast.com Sectioning the wheelhouse on the 66 Mustang!
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Spraying clear coat on the Eastwood Mustang project. We have sprayed the primer sealer, base coat and stripes in previous videos. Now we are ready to spray clear coat on the car. In this video we are going to show you the steps we took to spray the clear coat. FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/B1zIqwZfdjs
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
We are #painting #pinstripes and decals on the Eastwood Mustang project. We had stencils made from the graphic shop for the decal and used fine line pull out tape for the pinstripes. Unless you're an artist and can freehand, #custompainting and stripes consists of a lot of masking. But it's all worth it in the end. For more info about fine line pull out striping tape http://amzn.to/29FMtKz This is the tape we used for upper pinstripe.
FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/znwR4o01wkc
________________________________________
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___________________________________________
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___________________________________________
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_________________________________________
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_________________________________________
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_________________________________________
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_________________________________________
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.
http://CollisionBlast.com/ - - Another important step in auto painting is to properly cleaning and maintain your tools and equipment. This article is going to emphasize properly cleaning your spray gun.
You Made It This Far
One of the common problems that I have seen as an instructor is students trying to paint with pattern problems. An improperly cleaned paint gun can cause a number of problems, which could have been prevented if the spray gun would have been properly cleaned the prior use. You spent hours repairing and prepping this car, don't let a dirty spray gun ruin it for you.
Prevention
It is really simple to prevent many of the spraying problems by proper cleaning. The key is to clean it each time that you use the spray gun. There are different cleaning systems, but they are all designed to remove all coatings from inside and outside of the gun. Once the gun is clean you can wipe it dry and store it for the next use.
To read the full article visit http://ezinearticles.com/?A-Clean-Spray-Gun-is-Worth-Gold---Properly-Cleaning-Your-Paint-Gun&id=4398638
Bonus video - Check out this video. The next time you're in the lake remember this GOLIATH TIGER FISH video....look at the teeth on this thing!!!!! http://www.youtube.com/watch?v=7Tkl4ziRNVU
Paint defects - Dry and Bumpy base coat is a paint defect caused by dry overspray landing on paint surface. Dry spray is the opposite of runs. This is caused by being too far away, too much air pressure or wrong reducer. This will give it a rough or bumpy look. When you look at it the reflections look blurry, not that glossy mirror look. To prevent this problem make sure your gun setting are correct. Read the technical data sheet for the products you're using for recommended reducers, air pressure, and other recommendations.
If it's not too bad dry spray can usually be fixed by sanding and polishing.
FREE access to training at http://CollisionBlast.com Share this video https://youtu.be/h9TlMmTVBPU
________________________________________
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
___________________________________________
Basic Auto Body and Paint
Dent Repair
http://www.collisionblast.com/dent-repair/
Body Fillers
http://www.collisionblast.com/body-fillers/
Welding
http://www.collisionblast.com/welding/
Plastic Repair
http://www.collisionblast.com/2013/04/02/plastic-repair/
Paint Prep
http://www.collisionblast.com/paint-prep/
Spray Gun Adjustment
http://www.collisionblast.com/2012/11/17/spraying-painting-tips-how-to-adjust-a-spray-gun-to-produce-professional-paint-job/
Paints and Clears
http://www.collisionblast.com/paints-and-clears/
Detailing
http://www.collisionblast.com/car-detailing/
Paint Defects
http://www.collisionblast.com/paint-defects/
----------------------------------------------------------------------
PLAYLISTS
___________________________________________
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_________________________________________
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_________________________________________
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_________________________________________
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_________________________________________
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.