This is a workflow on creating a Spiral (helix) wind turbine.
I hope there are things for you to learn :)
...
https://www.youtube.com/watch?v=BjwX9_4Q7Ew
This is only a short demonstration of the possibility to make a parametric anti-stress sphere toy thing in Fusion 360.
I didn't want to spoil my own challenge by showing a possible workflow.
The workflow is not the most useful one and more of a brain exercise.
...
https://www.youtube.com/watch?v=VcW0FeDaNz0
This is a short video of me designing a tetrahedron (platonic solid) in Fusion 360.
Using no math or angles, making the software do all the "hard" work.
The model is parametric in that there is only one dimension, then changing the dimension in the first sketch the final solid body updates.
Hope this is useful for you out there :)
https://en.wikipedia.org/wiki/Tetrahedron
https://en.wikipedia.org/wiki/Platonic_solid
...
https://www.youtube.com/watch?v=2B7F4nIFEzY
Here is a workflow for a 3V frequency Geosphere or Dome.
This is only for creating the base geometry of the sphere/some.
0:00 Intro
2:31 Sketch 1 (Dimension)
2:47 Golden Ratio Rectangle
6:30 Construction Plan
6:44 Sketch 2 (Triangle face)
7:00 Icosahedron face
7:20 Subdividing Triangle
9:39 Sketch 3 (Vertex lines 3D)
11:55 Sketch 4 (Geosphere faces)
12:30 Surface Patch
12:44 Stitch bodies
12:58 Circular pattern creating all faces.
15:25 Final Stitch Into Solid body
...
https://www.youtube.com/watch?v=p7kMyu1y6pE
Here is my workflow fot the challenge i posted a week a go.
I have changed some settings for comments lets see if more comments gest visible (and not to much spam)
0:00 Intro
0:30 The mass 221g
2:51 Cylinder
3:40 Sketch Slot shape
5:15 Cut first hole
5:45 Helix Surface
8:00 Second hole
9:27 Cut second hole
9:50 Thicken surface cutting slot
10:35 Circular pattern slots
11:00 Physical material
11:40 Done
...
https://www.youtube.com/watch?v=lwyC7uRVZoA
This is a short video of me designing a regular dodecahedron (platonic solid) in Fusion 360.
Using no math or angles, making the software do all the "hard" work.
The model is parametric in that there is only one dimension, then changing the dimension in the first sketch the final solid body updates.
New version using Lofts that make it possible to sketch on alla faces of the Dodecahedron.
Hope this is useful for you out there :)
https://en.wikipedia.org/wiki/Regular_dodecahedron
https://en.wikipedia.org/wiki/Platonic_solid
...
https://www.youtube.com/watch?v=w_VRjbJEW_4
New bearings in fan/motor, some tips on how to change bearings.
This is for the "old" style fan motor with only AC voltage input, new motors of EC style with AC voltage and a control signal is a bit different to change the bearings in.
This was not a bad case but it's easy to replace the bearings and avoid future problems
Music (Intro):
Deliberate Thought av Kevin MacLeod licensieras under licensen Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Källa: http://incompetech.com/music/royalty-free/?keywords=deliberate+thought
Artist: http://incompetech.com/
Nya kullager i fläkt.
Ventex, MinMaster, Bahco, 608 kullager. Ventilation, fläkt
...
https://www.youtube.com/watch?v=QAHsoFwTq8U