FREE access to training at http://CollisionBlast.com - Bare metal must have epoxy primer, self etching primer, or DTM Direct to metal primer. Primer surfacer should not be applied directly to bare metal. In this video, I will discuss the three primers and let you decide which one you prefer.
Mixing Lids and Mixing Cups Information I had some of you ask me where you can get one of the mixing lids or cups like I use in the video. I found some online for you to check out. The lids are very helpful and make mixing much easier. Here are the links
FREE access to training at http://CollisionBlast.com - Blending automotive paint is a techniques used to fade the new color into the original color to give you the illusion of a perfect color match. It is necessary to blend metallic and pearl colors in order to have a good match in most cases.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
FREE access to training at http://CollisionBlast.com - Tube tape is a new product used to mask door, trunk, and deck lid jambs. There are many other ways this tape can be used as well. For more information about tube tape visit http://tubetape.works Use code word Donnie for 10% off.
Share this video https://youtu.be/VW5LO6Jj5Bc
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
PLAYLISTS
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
http://CollisionBlast.com - Quarter Panel Replacement - What is you welded on a quarter or any weld-on panel to discover it did not fit correctly? Not much you could do at that point! Other than to start cutting into the panel again. Therefore, it is important to check the fit for weld on panels often. It may seem redundant and time consuming, but this may save you time and money in the long run. Like the saying, better safe than sorry. When it comes to weld-on panels, i recommend taking extra time to test fit so everything will work as planned when the welder is cranked on.
http://www.mymustangrestoration.com/mustang-restoration-project-how-to-remove-a-rusted-outer-wheelhouse-on-a-66-mustang/ - DIY Video demonstrates how to change a rusted wheel house on a 1966 Ford Mustang with basic hand tools.
For more 66 Mustang Restoration tips visit http://MyMustangRestoration.com
This video is intended for the DIY home project. I have other videos demonstrating how to use power tools. For more tips and videos, visit http://CollisionBlast.com
http://CollisionBlast.com - 3M Auto Boot Camp New Product Update - Hookit Card E-Coat Disc 30695 - Donnie Smith here, in this video I'm going to show you a new 3M product. I recently returned from 3M headquarters from their 3M auto boot camp. While there I had the opportunity to learn about many of their new automotive products. This video is specifically about a new sandpaper. E-coat is becoming very difficult to sand, as they it is a much harder product. Therefore, regular sandpaper is wearing out before properly scuffing the panel. If not properly scuffed, could lead to paint failure resulting in peeling coatings. Introducing 3M hard E-coat discs. This is a new products designed specifically to sand these difficult hard surfaces. The new sandpaper will not give out as the older sandpaper. What was taking you 6-8 disks can now be done with one on E-coats and ceramic clears. If you are having troubles with this I encourage you to check this out.
http://CollisionBlast.com This is a lesson on how to generate collision repair estimates. In this lesson we are going to talk about why you want to write a thorough estimate.
http://CollisionBlast.com/Books - - This is a test video as I learn thisn new system so please bear with me. This video is about some of the questions that I have been getting about paint guns. The audio does not sound very good so, but hope to improve for the next video. Visit Donnie-Smith.com for more info.
FREE access to training at http://CollisionBlast.com How would matte clear coat look as a tri coat, over metallics, and other colors? We tested this to see what it looks like and it created some awesome looking paint effects. In this video, I will also give you some tips on spraying a pearl let-down panel to match car paint when color matching.
I am on Spring Break this week, but when I return, we'll be giving more tools as giveaways, so keep watching for our Tuesday videos.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.