Huanyang VFD setup for use with an RS485 USB adapter.
If you find what I do helpful join my Patreon at...
https://www.patreon.com/oncnc
If you only found me helpful on one video then send me $1 at...
https://www.paypal.com/paypalme/oncnc
Contributing keeps me making content. It defrays the cost so I can keep at it.
Find me at...
http://www.oncnc.com
...
https://www.youtube.com/watch?v=NZkdsbNNGqw
Rebuilding and updating a CNC controller. LPT to USB conversionn
If you find what I do helpful join my Patreon at...
https://www.patreon.com/oncnc
If you only found me helpful on one video then send me $1 at...
https://www.paypal.com/paypalme/oncnc
Contributing keeps me making content. It defrays the cost so I can keep at it.
Find me at...
http://www.oncnc.com
...
https://www.youtube.com/watch?v=QKiN6Cfqzg8
This is part 1 of the Power Feed Build based on a stepper motor.
Part 1 is public, the rest of the series will be patreon only.
The parts list is also on Patreon along with the links of where you can obtain the parts I used in my build..
Http:/www.OnCNC.com
https://www.patreon.com/oncnc
...
https://www.youtube.com/watch?v=VJYXVvKRfKA
My LMS metal gear upgrade failed to I took the step up to a belt drive.
This kit is of barely acceptable quality, however, it is the best of the current offerings. I was appalled that for $250 using maybe $30 worth of materials that they didn't bother with deburring the parts and the finish of the pulleys it awful. But I can't use my mill as is so I installed it.
I will say it functions well until you need torque. The motor pully is tiny and does not offer the belt much wrap so it slips. I retightened the belt repeatedly for the drilling of a 1.5-inch hole. This is why I preferred gears.
It is what it is and when I get the time I'll make my own from the Hoss Machine plans.
HTTP://WWW.OnCNC.com
...
https://www.youtube.com/watch?v=wd0pbhHnyIo
I am building yet another power feed and wanted to cool the driver and step generator. So I decided to put in a fan, then thought about a fan filter.
...
https://www.youtube.com/watch?v=hkQzMkJZfQQ