Published By
Created On
10 Jan 2021 10:11:03 UTC
Transaction ID
Cost
Safe for Work
Free
Yes
Gulf Racing Aston Martin Vantage V8 - Full Indepth Interior and Exterior Walkaround
The Aston Martin Vantage is a series of hand-built sports cars from the British automotive manufacturer Aston Martin. Aston Martin has previously used the "Vantage" name on high-performance variants of their existing GT models, notably on the Virage-based car of the 1990s. The modern car, in contrast, is the leanest and most agile car in Aston's lineup. As such, it is intended as a more focused model to reach out to potential buyers of cars such as the Porsche 911 as well as the exotic sports and GT cars with which Aston Martins traditionally compete.
Following the unveiling of the AMV8 Vantage concept car in 2003 at the North American International Auto Show designed by Henrik Fisker, the production version, known as the V8 Vantage was introduced at the Geneva Motor Show in 2005 for the 2006 model year. The two seat, two-door coupé had a bonded aluminium structure for strength and lightness. The 172.5 inch (4.38 m) long car featured a hatchback-style tailgate for practicality, with a large luggage shelf behind the seats. In addition to the coupé, a convertible, known as the V8 Vantage Roadster, was introduced later in that year.
The V8 Vantage was initially powered by a 4.3 L (4,280 cc) quad-cam 32-valve V8 which produced 380 bhp (283 kW; 385 PS) at 7,300 rpm and 409 N⋅m (302 lb⋅ft) at 5,000 rpm. However, models produced after 2008 had a 4.7-litre V8 with 420 bhp (313 kW; 426 PS) and 470 N⋅m (347 lb⋅ft) of torque. Though based loosely on Jaguar's AJ-V8 engine architecture, this engine was unique to Aston Martin and featured race-style dry-sump lubrication, which enabled it to be mounted low in the chassis for an improved center of gravity. The cylinder block and heads, crankshaft, connecting rods, pistons, camshafts, inlet and exhaust manifolds, lubrication system and engine management were all designed in house by Aston Martin and the engine was assembled by hand at the AM facility in Cologne, Germany, which also built the V12 engine for the DB9 and Vanquish.
In May 2008, Aston Martin announced new technological updates for the Vantage, which included changes to the engine, transmission, suspension and appearance. New cylinder liners that were now pressed into the aluminium block instead of the original cast-in variants allow a thinner liner, which in turn allows a larger capacity of 4.7 L. The cylinder bore and stroke has been increased from 89 mm (3.5 in) to 91 mm (3.6 in) and 86 mm (3.4 in) to 91 mm (3.6 in) respectively, giving a total displacement of 4,735 cc. The dry sump lubrication system was also modified.
The "Sportshift" semi-automatic transmission benefited from a software update, while a lightened flywheel was introduced for both the manual and the Sportshift versions. Aston Martin also stiffened the suspension and the suspension system now uses Bilstein dampers. An optional sports pack was offered with stiffer springs for better handling and all-new 5-spoke alloy wheels. Sportshift-equipped models also received a new dual throttle mapping update which allows the driver to choose from the default sport mode, or comfort mode, which gives more comfortable shifts and throttle input for drivability. For the 2012 model year, Aston Martin replaced the 6-speed Sportshift with the 7-speed Sportshift II first utilised in the V8 Vantage S.
...
https://www.youtube.com/watch?v=cXYeOjqYvrI
Following the unveiling of the AMV8 Vantage concept car in 2003 at the North American International Auto Show designed by Henrik Fisker, the production version, known as the V8 Vantage was introduced at the Geneva Motor Show in 2005 for the 2006 model year. The two seat, two-door coupé had a bonded aluminium structure for strength and lightness. The 172.5 inch (4.38 m) long car featured a hatchback-style tailgate for practicality, with a large luggage shelf behind the seats. In addition to the coupé, a convertible, known as the V8 Vantage Roadster, was introduced later in that year.
The V8 Vantage was initially powered by a 4.3 L (4,280 cc) quad-cam 32-valve V8 which produced 380 bhp (283 kW; 385 PS) at 7,300 rpm and 409 N⋅m (302 lb⋅ft) at 5,000 rpm. However, models produced after 2008 had a 4.7-litre V8 with 420 bhp (313 kW; 426 PS) and 470 N⋅m (347 lb⋅ft) of torque. Though based loosely on Jaguar's AJ-V8 engine architecture, this engine was unique to Aston Martin and featured race-style dry-sump lubrication, which enabled it to be mounted low in the chassis for an improved center of gravity. The cylinder block and heads, crankshaft, connecting rods, pistons, camshafts, inlet and exhaust manifolds, lubrication system and engine management were all designed in house by Aston Martin and the engine was assembled by hand at the AM facility in Cologne, Germany, which also built the V12 engine for the DB9 and Vanquish.
In May 2008, Aston Martin announced new technological updates for the Vantage, which included changes to the engine, transmission, suspension and appearance. New cylinder liners that were now pressed into the aluminium block instead of the original cast-in variants allow a thinner liner, which in turn allows a larger capacity of 4.7 L. The cylinder bore and stroke has been increased from 89 mm (3.5 in) to 91 mm (3.6 in) and 86 mm (3.4 in) to 91 mm (3.6 in) respectively, giving a total displacement of 4,735 cc. The dry sump lubrication system was also modified.
The "Sportshift" semi-automatic transmission benefited from a software update, while a lightened flywheel was introduced for both the manual and the Sportshift versions. Aston Martin also stiffened the suspension and the suspension system now uses Bilstein dampers. An optional sports pack was offered with stiffer springs for better handling and all-new 5-spoke alloy wheels. Sportshift-equipped models also received a new dual throttle mapping update which allows the driver to choose from the default sport mode, or comfort mode, which gives more comfortable shifts and throttle input for drivability. For the 2012 model year, Aston Martin replaced the 6-speed Sportshift with the 7-speed Sportshift II first utilised in the V8 Vantage S.
...
https://www.youtube.com/watch?v=cXYeOjqYvrI
Author
Content Type
Unspecified
video/mp4
Language
Unspecified
More from the publisher
VIDEO
BMW M
bmw-m3-competition-package-full-indepth
The BMW M3 is a high-performance version of the 3 Series, developed by BMW's in-house motorsport division, BMW M GmbH. M3 models have been derived from the corresponding generations of the BMW 3 Series.
The initial model was available in a coupé body style. At times the M3 has also been available in saloon and convertible body styles. Due to the coupé and convertible models no longer being part of the 3 Series range from 2015, the F82/F83 coupe and convertible models are now called the M4 based on the newly introduced 4 Series. The M3 name remains in use solely for the saloon version.
Upgrades over the standard 3 Series automobiles include more powerful and responsive engines, improved handling/suspension/braking systems, aerodynamic body enhancements, lightweight components and interior/exterior accents with the tri-colour "M" (Motorsport) emblem.
Production of the F80 M3 started in 2014 (2015 for the US), introducing it as only a saloon following the company's plans to split off the BMW 4 Series coupé/convertible from the BMW 3 Series. Unlike its E90 M3 saloon predecessor, but similar to that generation's E92 coupé, the F80 M3 features a carbon fibre roof and driveshaft. The F80 M3, as well as its coupe counterpart the M4, were revealed at the 2014 North American International Auto Show.
The performance of the car has improved over the previous generation. The 7-speed M-DCT transmission accelerates the car from 0 to 100 km/h (62 mph) in 4.1 seconds. The 0 to 100 km/h (62 mph) acceleration time with the conventional 6-speed manual transmission is 4.3 seconds. The M3 and M4 run the standing kilometre in 22.20 seconds. This is a comparable time to the 2006 Corvette Z06, which took 22.24s to accomplish the same. Top speed is limited to 155 mph (249 km/h) but an optional M Driver's package raises this to 174 mph (280 km/h). The new engine generates up to 317 kW; 431 PS (425 hp) between 5,500 and 7,300 rpm and up to 406 lb-ft (550 N·m) of torque between 1,850 and 5,500 rpm.
...
https://www.youtube.com/watch?v=JjZlIisOZBA
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
ROLLS
rolls-royce-dawn-high-quality-in-depth
Rolls-Royce Dawn - High Quality In-depth Interior and Exterior Walkaround.
The Rolls-Royce Dawn is a British handmade 4 seat luxury convertible manufactured by Rolls-Royce Motor Cars. It was announced in time for the 2015 Frankfurt Motor Show.
The engine is a direct-injection twin-turbo 6.6-litre V12 that produces 563 bhp (420 kW; 571 PS) at 5,250 rpm and torque of 820 N⋅m (605 lb⋅ft) at 1,500 rpm. The car has a limited top speed of 250 km/h (155 mph) and weighs 2,560 kg (5,644 lb). It can accelerate from 0-100 km/h (62 mph) in 4.9 seconds. The combined fuel consumption of the Dawn shown by Rolls-Royce is 14.2 litre/100 km or 19.9 mpg. The black label version has 593 hp (442 kW; 601 PS) and 620 lb⋅ft (841 N⋅m) of torque.
Rolls-Royce has said that 80% of its body panels are new compared to the Wraith.
The front grille gets a design recess compared to the Wraith. The front bumper has been extended by 53 mm (2 in). The car has 20-inch polished wheels.
...
https://www.youtube.com/watch?v=I3q0nH-BDv4
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
AUDI
audi-q7-quattro-3-0-tdi-interior-and
The Audi Q7 is a full-size luxury SUV made by the German manufacturer Audi, unveiled in September 2005 at the Frankfurt Motor Show. Production of this 7-seater SUV began in the autumn of 2005 at the Volkswagen Bratislava Plant in Bratislava, Slovakia. It was the first SUV offering from Audi and went on sale in 2006. Later, Audi's second SUV, the Q5, was unveiled as a 2009 model. Audi has since unveiled a third SUV model, the Q3, which went on sale in the 3rd quarter of 2011. The Q7 shares a Volkswagen Group MLB platform and chassis with the Bentley Bentayga, Lamborghini Urus, Porsche Cayenne and the Volkswagen Touareg
The Q7 (internally designated Typ 4L) utilizes a modified version of the Volkswagen Group PL71 platform. Previewed by the Audi Pikes Peak quattro concept car, the Q7 is designed more for on-road use, and was not meant for serious off-road use where a transfer case is needed. In an off-road test through the Australian outback it fared well for a "soft roader".
Although it lacks a low-range transfer case, it has quattro permanent four-wheel drive system with a central locking differential, and a self-levelling air suspension with Continuous Damping Control, called Adaptive air suspension, which helps in off-road situations.
Development began in 2002 under the code AU 716, primarily focused on the Pikes Peak Concept. Design work was frozen for the Concept in July 2002, for presentation at the North American International Auto Show in January 2003. Following the introduction of the concept, full-scale development began on Typ 4L of the PL71 platform.
The production design was frozen in late 2003, for a late 2005 start of production. Prototypes went into testing in 2004, with development concluding in the first half of 2005. It introduced the world's only series production passenger car V12 TDI diesel engine. While the Q7 has been the flagship SUV in Audi's product portfolio, a new top-of-the-line model, which is likely to be called the Audi Q8, is in the cards. It debuted in its concept form at the 2017 Detroit auto show.
...
https://www.youtube.com/watch?v=fjxN63GHS8g
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
2019
2019-rolls-royce-wraith-v12-in-depth
2019 Rolls-Royce Wraith V12 - In-depth Full Interior and Exterior Walkaround.
In the decade since Rolls-Royce Motor Cars' re-emergence as the most revered name in motoring, the word Phantom has become synonymous with peerless luxury. Its launch in 2003 emphatically heralded the marque’s return to the very pinnacle of excellence, presenting a hand-made luxury good without equal to connoisseurs across the world.
Ghost followed in 2009. It revived one of the most celebrated names in motoring history, embodying the effortless dynamism that characterises the car, as well as the inherent beauty of its 20th Century namesake.
Choosing a name to reflect the newest Rolls-Royce model’s unique character was therefore vital. The task was to find something to suit a car that promised to draw superlatives; the boldest design and the most dynamic, powerful car in the marque’s 108 year history. Yet, a car with more than a hint of the noire.
The choice was clear. The newest addition to the Rolls-Royce family would be called Wraith.
...
https://www.youtube.com/watch?v=Dg34ckc8iSk
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
FORD
ford-gt40-recreation-a-replica-done
The Ford GT40 is a high-performance endurance racing car with the Mk I, Mk II, and Mk III model cars being based upon the British Lola Mk6, and were designed and built in England, while the GT40 Mk IV model was designed and built in the United States. The range was powered by a series of American-built engines modified for racing. The GT40 won the 24 Hours of Le Mans four consecutive times, from 1966 to 1969 (1966 being the Mk II, 1967 the Mk IV, and 1968–1969 the oldest chassis design, the Mk I), including a 1-2-3 finish in 1966. In 1966, with Henry Ford II personally in attendance at Le Mans, the Mk II GT40 provided Ford with the first overall Le Mans victory for an American manufacturer, and the first victory for an American manufacturer at a major European race since Jimmy Murphy´s triumph with Duesenberg at the 1921 French Grand Prix. The Mk IV GT40 that won Le Mans in 1967 is the only car designed and built entirely in the United States to achieve the overall win at Le Mans.
The GT40 was originally produced to win long-distance sports car races against Ferrari (who won at Le Mans six times in a row from 1960 to 1965). Ford/Shelby chassis #P-1075, which won in 1968 and 1969, is the first car in Le Mans history to win the race more than once, using the same chassis. Using an American Ford V-8 engine, originally of 4.7-liter displacement capacity (289 cubic inches), it was later enlarged to the 4.9-liter engine (302 cubic inches), with custom designed alloy Gurney–Weslake cylinder heads.
The car was named the GT (for Grand Touring) with the 40 representing its overall height of 40 inches (1.02 m, measured at the windshield) as required by the rules. Large-displacement Ford V8 engines (4.2-liter, 4.7-liter and 7-liter) were used, compared with the Ferrari V12, which displaced 3.0 liters or 4.0 liters.
Early cars were simply named "Ford GT". The name "GT40" was the name of Ford's project to prepare the cars for the international endurance racing circuit, and the quest to win the 24 Hours of Le Mans. The first 12 "prototype" vehicles carried serial numbers GT-101 through GT-112. The "production" began and the subsequent cars—the MkI, MkII, MkIII, and MkV (with the exception of the MkIV, which were numbered J1-J12)—were numbered GT40P/1000 through GT40P/1145, and thus officially "GT40s". The name of Ford's project, and the serial numbers dispel the story that "GT40" was "only a nickname."
Henry Ford II had wanted a Ford at Le Mans since the early 1960s. In early 1963, Ford reportedly received word through a European intermediary that Enzo Ferrari was interested in selling to Ford Motor Company. Ford reportedly spent several million dollars in an audit of Ferrari factory assets and in legal negotiations, only to have Ferrari unilaterally cut off talks at a late stage due to disputes about the ability to direct open wheel racing. Ferrari, who wanted to remain the sole operator of his company's motor sports division, was angered when he was told that he would not be allowed to race at the Indianapolis 500 if the deal went through since Ford fielded Indy cars using its own engine, and didn't want competition from Ferrari. Enzo cut the deal off out of spite and Henry Ford II, enraged, directed his racing division to find a company that could build a Ferrari-beater on the world endurance-racing circuit.
...
https://www.youtube.com/watch?v=08oy8Y7Q_pE
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
ASTON
aston-martin-db9-interior-and-exterior-4
The Aston Martin DB9 is a British grand tourer first shown by Aston Martin at the 2003 Frankfurt Auto Show. Available both in coupé and a convertible bodystyles, the latter being known as the Volante, the DB9 was the successor of the DB7. It was the first model built at Aston Martin's Gaydon facility.
The DB9 was originally designed by Henrik Fisker, has an aluminium construction. The chassis is the Ford developed VH platform whilst the engine is the 5.9-litre V12 from the Vanquish. The 2013 model year facelift saw many improvements to the design, the engine and the overall driving experience.
The DB9 is rated well by car critics, who appreciate the car's interior and exterior design. In spite of comments regarding the DB9's poor handling, reviewers liked the car's ride and driving experience. Some also held issue with the DB9's small rear seats, cargo space and poor satnav.
Aston Martin Racing adapted the DB9 for sports car racing, producing the DBR9 for FIA GT1 and the DBRS9 for FIA GT3. These two cars are modified DB9 models adapted for motorsport; the interior features are removed and the aluminium body panels are replaced by carbon fibre panels. Additionally, the engine has been tweaked in both the cars to produce more horsepower and torque.
Production of the DB9 ended after 12 years in 2016, having been replaced by the DB11 which uses an all-new platform and engine.
...
https://www.youtube.com/watch?v=MztX76HS5OQ
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
ROLLS
rolls-royce-dawn-black-badge-v12
Rolls-Royce Dawn BLACK BADGE V12 - Detailed Exterior and Interior Walkaround.
The Rolls-Royce Dawn is a British handmade 4 seat luxury convertible manufactured by Rolls-Royce Motor Cars. It was announced in time for the 2015 Frankfurt Motor Show.
The engine is a direct-injection twin-turbo 6.6-litre V12 that produces 563 bhp (420 kW; 571 PS) at 5,250 rpm and torque of 820 N⋅m (605 lb⋅ft) at 1,500 rpm. The car has a limited top speed of 250 km/h (155 mph) and weighs 2,560 kg (5,644 lb). It can accelerate from 0-100 km/h (62 mph) in 4.9 seconds. The combined fuel consumption of the Dawn shown by Rolls-Royce is 14.2 litre/100 km or 19.9 mpg. The black label version has 593 hp (442 kW; 601 PS) and 620 lb⋅ft (841 N⋅m) of torque.
Rolls-Royce has said that 80% of its body panels are new compared to the Wraith.[3]
The front grille gets a design recess compared to the Wraith. The front bumper has been extended by 53 mm (2 in). The car has 20-inch polished wheels.
...
https://www.youtube.com/watch?v=DC8seMtteX8
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
ASTON
aston-martin-rapide-v12
Aston Martin Rapide
aston martin rapide s
aston martin rapide for sale
aston martin rapide price
aston martin rapide s price
aston martin 4 door
2016 aston martin rapide s
4 door aston martin
used aston martin rapide
aston martin sedan
...
https://www.youtube.com/watch?v=kX8KgrHVFmc
Transaction
Created
1 year ago
Content Type
Language
video/mp4
VIDEO
RANGE
range-rover-evoque-interior-and-3
The Land Rover Range Rover Evoque (commonly known as the Range Rover Evoque) is a subcompact luxury crossover SUV produced by the British manufacturer Jaguar Land Rover, a subsidiary of Tata Motors, under their Land Rover marque. The Evoque is similar to the Land Rover LRX concept vehicle, which was unveiled at the North American International Auto Show in January 2008. It has been produced since July 2011 in three- and five-door versions, with both two-wheel and four-wheel drive.
The size of the LRX concept vehicle complemented a wide array of efficiency-improving technologies in the form of Land Rover’s e_Terrain technologies. These included biofuel compatibility, lightweight construction materials, and technologies such as the removable carbon composite roof panels, regenerative brakes, a stop-start system, and the ERAD (electric rear axle drive) parallel hybrid powertrain system.
The ERAD system could propel the LRX to speeds up to 20 mph (32 km/h) before the engine was started by an integrated starter generator as part of the stop-start system. ERAD was designed to reduce CO2 emissions by an average of 20% under the NEDC test cycle and was expected to offer another 10% reduction in extra-urban driving situations while also optimising the off-road ability of the vehicle. Land Rover aimed to achieve 120 g/km CO2 emissions and fuel economy of 60 mpg‑imp (4.7 L/100 km; 50 mpg‑US) on the European combined cycle with an efficient 2.2-litre turbodiesel engine. The engine would become the only four-cylinder vehicle in the Range Rover lineup.
The Terrain Response system was also included offering sport and eco modes in addition to the existing grass, gravel, snow, and sand modes. Typical Land Rover design traits aim at improving off-road performance included a prominent driving position, hill descent control, and useful approach and departure angles. A Land Rover first was an air intake system integrated into the roof that offered exceptional wading capabilities, though this feature did not make it to the production model. Land Rover's Range Rover styling was visually apparent in the form of the clamshell bonnet, the ‘floating’ roof, dual-pocket headlamps, and raked roof line.
Interior design improvements were another main focus of the LRX concept, though the interior of the production Evoque changed significantly from the concept LRX. Notable interior features in the LRX included ambient interior lighting that changed according to Terrain Response settings, and vehicle data that were presented to the driver through a ‘floating’ three-dimensional LCD display. An aluminium centre console with an iPhone docking station stretched the length of the cabin, separating the four seats and the tailgate. Seats with open frameworks were used to give the impression of an airy interior, while also creating useful under-seat and under-floor stowage areas. Electric motors folded the rear seats forward, providing enough room for two mountain bikes to be fitted upright, with front wheels removed and stored in dedicated slots in the floor.
...
https://www.youtube.com/watch?v=0fet5RTjsFw
Transaction
Created
1 year ago
Content Type
Language
video/mp4