Mechanical secondaries, rebuilt the carb. sterling accel pump mod. everything plugged with qwiksteel. runs like a champ. now to get plates and drive her ... https://www.youtube.com/watch?v=BvCWEkafhM0
Buddy upgraded his God Tier rig to a 5600x and he gave me his "old" 3600x and bought me a new MOBO and Ram!
Absolute LEGEND
Thanks Ryan Aka JDMFantasy!
full specs
AMD Ryzen 5 3600x
MSI B550 A-Pro
2x8gb 3600 MHZ Crucial Ballistix RGB
Gigabyte GTX 1070
860 EVO 256GB OS Drive
860 EVO 500GB game drive
ASUS TUF Alliance Temper Glass Case
Thanks for checking it out!
...
https://www.youtube.com/watch?v=VSs1Oa7BWy4
Found this PowerWheels on the curb. cleaned it up and put in a new battery and bought a charger. Runs Mint. It's for sale $10,000 obo
...
https://www.youtube.com/watch?v=902XMi3G4mQ
Josh B from Techno Toy Tuning will be noting the measurements and you should have a perfect fit installation in your case.
Hardware changes needed :
2x 30mm studs for the master cylinder & nuts washers lock washers
Remove 15mm from push-rods beveled end
If you need to DIY just grind down the diameter of the push-rod 3mm or so in small increments until it fits into the pin of the master cylinder, you want the rod to bottom out inside the master. Don't force the pin and operate the master without fluid or you could damage the seals.
...
https://www.youtube.com/watch?v=1UvO-elblZE