Design our first part and learning right away the concepts used for organization and efficiency when building parts.
...
https://www.youtube.com/watch?v=hk0El34xBkQ
Part one of my project to build a dual mini ITX computer set up, both housed in the same case. The case will be fabricated as well and lit with neopixels (WS2812 RGB LEDs). I'll also be modding a couple KVM switches so I can switch between dual monitors. I'll still be using four monitors, but the KVMs will swap the top and bottom sets.
I'll add upload more as the project progresses.
Follow my daily bs on Instagram
https://www.instagram.com/dotdissonance
...
https://www.youtube.com/watch?v=TfyvUDrpN_4
A look at some of the various soldering tips available for assembly or reworking.
Hakko FX-951 Tips
http://www.hakko.com/english/products/hakko_fx951_tips.html#productNav
...
https://www.youtube.com/watch?v=UVu14dB0x0g
A look at how sensitive a typical UAV magnetometer can be and what you should be concerned about when mounting.
...
https://www.youtube.com/watch?v=0yDKmTElr4o
Between this one and the previous KiCad Design Series video you should now have enough information to try building your own simple
circuit (VERY Simple) and get it sent out. **This is your homework!!
How cool or extravagant your project is NOT important. Getting it done on time and going through the full process is the point.
Another hour+ video so relax and pause as needed.
PCB Manufacturing
JLCPCB
https://jlcpcb.com/
OSHPark
https://oshpark.com/
Seeed Studio
https://www.seeedstudio.com/fusion_pcb.html
Parts Suppliers
Digikey
https://www.digikey.com/
Mouser
https://www.mouser.com/
...
https://www.youtube.com/watch?v=KxBfu7Z1h6I