http://CollisionBlast.com - If you have been in a auto accident, then you probably have damage to your car. If insurance is involved, then you will be dealing with an auto claim and a body shop. From there, they will take care of the repairs for you. However, if you are a DIY car enthusiast and have a car that you are wanting to repair yourself, then you are doing to need to know how to use Bondo. This video explains the steps that you will need to take to prepare the metal, apply Bondo and block the body filler. Once the body filler is finished out in 150 to 180 grit, it then ready for the paint steps.
FREE access to training at http://CollisionBlast.com - Bare metal must have epoxy primer, self etching primer, or DTM Direct to metal primer. Primer surfacer should not be applied directly to bare metal. In this video, I will discuss the three primers and let you decide which one you prefer.
Mixing Lids and Mixing Cups Information
I had some of you ask me where you can get one of the mixing lids or cups like I use in the video. I found some online for you to check out. The lids are very helpful and make mixing much easier. Here are the links
http://CollisionBlast.com/MixingLids
http://CollisionBlast.comPaintMixingCups
Technical Data Sheet Playlist
http://www.youtube.com/watch?v=V0KNB1Ar44E&list=PLOmXEqUJYh4l9qd2Vcds4aaiCfBbGMgxj
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_c...
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=...
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Creative Commons Music Used
http://freemusicarchive.org/
http://creativecommons.org/licenses/by/3.0
http://CollisionBlast.com - - Hammer off dolly is used to repair dents during the first rough out stages of metal straightening. You the dolly to push up on the lows and use a body hammer to tap down on the highs.
Once the dent is roughed out, use the hammer on dolly method.
If you would like more information about Larry Montanez, or you would like his contact information, you can connect with Larry on his phone 917-860-3885 or visit him on the web at http://www.pnlestimology.com
You can also read collision repair articles written by Larry at http://www.pnlestimology.com/category/hammer-and-dolly-articles/
Larry is a certified operations technician and a certified data analyst. His company P&L Consulting specializes in estimating, investigations, and consulting for the collision repair industry. He has provided training at SEMA, NACE, and other training events.
I asked Larry to meet with us on this hangout to discuss the importance of recommended procedures and how it is going to affect students and technicians in the industry.
http://CollisionBlast.com/ - In this ABRN How2 video, Ryan is going to demonstrate how to level a run using a razor blade. Once leveled, sanding and buffing will correct the run and having it look like there was never a run there.
FREE access to training at http://CollisionBlast.com - In this video, we are going to inspect a Honda before writing a repair estimate. We will discuss the sequence of writing a damage repair estimate and some of the things to look for. We will discuss different types of damage such as prior damage and how to discuss this with the customer.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
New tool demonstration for repairing plastic. The MS 2500. Chicago Pneumatic Tool DA giveaway winner revealed. FREE access to training at http://CollisionBlast.com Motor Guard revealed the Magna Stitcher MS 2500 at SEMA 2012. After visiting with Dave at SEMA he said that he would send me one when they became available. He is a man of his word, as the new plastic repair system arrived in the mail and I am excited to try it out and share the results with you. In this video, I am going to demonstrate the steps of repairing plastic using the new tool.
You can learn more about Motor Guards Magna Stitcher MS 2500 by visiting their website at http://motorguard.com/col_5.html
The winner of the Chicago Pneumatic DA will also be revealed in this video. If you are the winner, please message me with your mailing address so I can get the DA sent to you.
Also be sure to subscribe to this YouTube to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
Learn how to adjust a spray gun by watching my spray gun adjustment playlist at http://www.youtube.com/playlist?list=PL9D278D201EBFA3B6
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
Light Bar installation - In this video we are installing a 50 inch light bar from Auxbeam on a 2004 GMC Sierra pick-up. This is a straight light bar that mounts on the roof. You will need brackets for your make and model. more information about the light bar and brackets below.
Auxbeam Lighter - http://amzn.to/2mAGBcr
Chevy/GMC Brackets - http://amzn.to/2mhBb5c - 1999 - 2006
Add-On Fuse Circuit - http://amzn.to/2mmZKvE
FREE access to training at http://CollisionBlast.com Share this video
Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision
----------------------------------------------------------------------
PLAYLISTS
___
Q&A Video Response - https://www.youtube.com/playlist?list=PLFE0C4096959A85C4
Donnie and Jess - https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl
Eastwood Video Series - https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi
Plastic Repair - https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF
Rust Patch - https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB
Spraying Matte Colors - https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95
Spray Gun Adjustment - https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6
Masking Tips - https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ
Basic Car Maintenance - https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64
_
Join me on Twitter at http://Twitter.com/DonnieSmith7
Join our Facebook page at http://Facebook.com/CollisionBlast
_
For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com
_
Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.
If something is worth doing, then do your best and have a BLAST doing it.
_
DIY Auto Body and Paint -
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individuals talents, knowledge, and skills.