If there is one board I have been dreading testing, it is this one.
Final review will go over some more points I have found that I don't like about it in riding it longer. I am getting battery rattle from the casing. You can hear it in the video. It's gotten louder. The board is very quick, quiet and smooth. It's what the D3M should have been. The major competition for this in my mind is the Liftboard Dual / Benchwheel and in that case I would go ONYX. Previously vs the D3M I would have recommended Liftboard/Benchwheel because the D3M just had too many issues. It's not that they have trumped Boosted or Backfire, but they are delivering a board in their category that is above the rest in that specific ride style.
Thanks to KoowheelUSA for providing this board for review.
This isn't a "subscriber gain" contest, so you don't have to be subbed if you don't want. That's your bag, not mine. I would rather you liked my content than sub and not like it. So if you are planning to sub, then unsub later, don't bother. Just enter the contest bro.
RULES:
1: You must post your design to Thingiverse by midnight EST June 6th.
2: You can enter as many times as you like, but try to be reasonable LOL
3: Your bracket MUST be a SINGLE print design, not multi part.
4: The design must NOT use any supports.
5: You can support the deck, wheels or the trucks, it can be horizontal or vertical.
6: Your design can NOT be a remix of another design, it MUST be original.
7: You can use whatever design software you want, but you must provide a downloadable STL as the final output.
...
https://www.youtube.com/watch?v=pVH-GfD4Sfo
He's been haxored... hackted... hackarated... ROFLMAOWTFBBQ. WEBSITE HACKED.
I didn't think I would be talking about Souljaboy when I bought this. The Retro FC 168 in 1, Gameboy / NES / Famicom Clone, (only plays built in NES / Famicom games) is pretty decent... but is it decent at the price Souljaboy is selling them at?
Retro FC is $15.99 on Gearbest
http://bit.ly/retrofc-gearbest
I ordered one off eBay, but be careful, one of the sellers I bought from sold me a clone BitBoy NOT a Retro FC and it sucks worse than the OG BitBoy, which is pretty meh. I might get a NEW BitBoy to check out though... let me know in the comments if you want me to get one to check out.
---------------
Stuff I use:
----------------
...
https://www.youtube.com/watch?v=czBzEQPRXks
I RECOMMEND THIS BOARD AS LONG AS IT'S UNDER $400 including shipping. At that price, it's a GREAT deal.
The AEBoard Electric Longboard is super good at this price. It just KILLS all the other 90mm hub motor Chinese boards out there like the WowGo, Ownboard, Meepo etc in ride quality. The downside is the cheap deck and enclosure... but that cheap deck and enclosure help the ride feel. The price is right. Here is the review.
If you have a WowGo/Ownboard stick with that. It's the same board. Swap the deck.
DON'T BUY THIS BOARD UNLESS IT'S UNDER $400.
Coupon: HAPPYGO-AEBOARD (again, no idea if this works)
http://bit.ly/aeboard
...
https://www.youtube.com/watch?v=oPyTxSY8uMs
Welp. That is that. All reviews usually get 50mi, 30 days or until I break it and quite honestly, the WowGo All Terrain board is broken out of the box. I wanted to like it, and I do, but man, it has a huge deal breaker. If WowGo fixes it, I will revisit and re-review. Until then, this gets a thumbs down from me, which makes me sad.
Links from the video:
---------
WowGo All-Terrain Board:
Code PRESS25 should give you a discount.
http://bit.ly/wowgoAT
---------------
Stuff I use:
...
https://www.youtube.com/watch?v=uEqNIHR0Jw8
Looking to build your own electric longboard or do a Meepo / WowGo / Backfire deck swap?? Check out this new deck from Loaded! It's specifically geared towards Esk8!
Thanks to Loaded for supplying this pre-release deck to play with!
Check out the NEW Loaded Motherboard here:
http://bit.ly/loadedmotherboard !
---------------
Stuff I use:
----------------
...
https://www.youtube.com/watch?v=EujprrHDtmo
Holy sh!$t! I got to my office and there was a MK2 kit from Josef Prusa sitting in front of my door! No idea how he got my address, but let's build it!
5h 7m total build time.
Thank you so much to Josef Prusa for this MK2!
Check out these printers at http://prusa3d.com
Reviews here:
Go watch Joel : https://www.youtube.com/watch?v=AKXDIzoOvzY
Go watch Tom : https://www.youtube.com/watch?v=Kfe_84FGJ8c
...
https://www.youtube.com/watch?v=PaZxbFDBRbg
THIS VIDEO HAS BEEN MOVED TO MY DEDICATED 3D PRINTING CHANNEL! Click here! https://www.youtube.com/channel/UCykoDnu8UctgJObkKTg_2SA
...
https://www.youtube.com/watch?v=gmHa2toapT8
Building things while on camera can be a pain... BTW, the machine is great, but the spool holder kinda... sucks. Flipping it upside down keeps it from unraveling. I don't use the frame mounted spool holder. I use an external one mounted on the shelf.
Prusa MK2 Guide Video: https://www.youtube.com/watch?v=JqH41K2vq0g
-
Patreon: http://patreon.com/pressreset
Not sure what #SATPF is? http://satpf.com
...
https://www.youtube.com/watch?v=dBobTF0GaCc
I've updated the channel trailer again. This time, Stranger Things style, music and all. This was originally going to be used in my next video, but I decided it made the video too long and I didn't want the work to go to waste.
A tutorial video on how I recreated this will be up in a day or two so you can learn how to create your own.
...
https://www.youtube.com/watch?v=3A416wEfC5E